GGNTX Posted January 28, 2012 Share Posted January 28, 2012 Because of the available clearance, the rack cable must exit the helm on the starboard side of the boat, whereas the rotary cable exits on the portside, so it is obvious the rack cable will need to be somewhat longer. I have come up with this length by disconnecting the rotary cable at the helm and routing it to the starboard side, then measuring the distance from the end of the cable jacket to the helm. Seems reasonable, but if anyone done this conversion on a 91 to 94 ProStar190 and knows this cable length, I would certainly appreciate that information. GGNTX Link to comment Share on other sites More sharing options...
Baller_ Jody_Seal Posted January 28, 2012 Baller_ Share Posted January 28, 2012 A 19' Teleflex extreme cable should work. their may be a little excess but it will loop nicely under the deck and give a smother bend. I have done older Nautiques with the rack and pinion setup and am familiar with the older Mastercrafts but have not done that conversion. Link to comment Share on other sites More sharing options...
Baller jerseydave Posted January 28, 2012 Baller Share Posted January 28, 2012 You could ask on the teamtalk forum, maybe someone has done the conversion before. I have a '93 also, I'd be interested in the results (better steering feel and control I would guess?) Link to comment Share on other sites More sharing options...
.webp.fe8dc8cebd1653a72f884b76caf34341.webp)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now