warsaw_ski Posted May 14, 2014 Share Posted May 14, 2014 where exactly should I assemby the reflex front plate size 10xl on the Radar Senate Graphite 67 2014? thanks in advance. Link to comment Share on other sites More sharing options...
Baller chris_logan Posted May 14, 2014 Baller Share Posted May 14, 2014 I would set the boot on the plate (not under tension), then on the ski, and adjust it until the back edge of the heel (nearest the plate) is at 29.25" or ~74.3cm as a good starting point. Don't just choose holes - always measure. Link to comment Share on other sites More sharing options...
Administrators Horton Posted May 14, 2014 Administrators Share Posted May 14, 2014 30 Goode ★ HO Syndicate ★ KD Skis ★ MasterCraft ★ PerfSki Radar ★ Reflex ★ S Lines ★ Stokes ★ Baller Video Coaching System Become a Supporting Member or make a One-time Donation Link to comment Share on other sites More sharing options...
warsaw_ski Posted May 15, 2014 Author Share Posted May 15, 2014 Thank You) Link to comment Share on other sites More sharing options...
Baller eddie_roberts_jr Posted May 15, 2014 Baller Share Posted May 15, 2014 Like Horton says 30" from the heel of your Reflex front boot to the top edge of the tail of the ski will put you right in the ballpark. Link to comment Share on other sites More sharing options...
warsaw_ski Posted May 22, 2014 Author Share Posted May 22, 2014 Can i have one more question, cuz i'm wondering should i mesure the distance from point A or B? like on the picture Or should i mount it as in the irstuction reflex manual on the site 8?? link below http://reflexworld.com/wp-content/uploads/2014/02/reflex-user-manual-2014.pdf Thanks in advance Link to comment Share on other sites More sharing options...
Baller Deanoski Posted May 23, 2014 Baller Share Posted May 23, 2014 point a below the heel block Link to comment Share on other sites More sharing options...
warsaw_ski Posted May 24, 2014 Author Share Posted May 24, 2014 that is, at point A? Link to comment Share on other sites More sharing options...
warsaw_ski Posted May 24, 2014 Author Share Posted May 24, 2014 Horton Posts: 14,215 Administrator April 13 edited April 13 Flag IMPORTANT NOTE - Binding placement is super important. On my first ride I was at 30.25 and the ski sort of sucked. I moved the bindings back to 30 and KaPow! the ski came to life. You may think that since this is not a $1,400 ski that settings are not important... you would be wrong. Link to comment Share on other sites More sharing options...
warsaw_ski Posted May 24, 2014 Author Share Posted May 24, 2014 as you can see it is important to find the point Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now