2018 Vapor Pro Build Bf settings

[C5Quest]

Anyone running Reflex bindings on a 2018 Vapor Pro? I’m on a 2018 66’ and experimenting with Long/Shallow and Deep/Short settings but the holes on reflex binding plate only allow a Bf of 29 5/8 or 29 3/8 with the hole pattern. 29 5/8 is the L/S setting which I can get. D/S is 29 1/2. Basically smack in the middle of the 2 holes. Anyone running just running D/S fin settings with 29 5/8 or 29 3/8? I even tried putting on a Vapor front boot to see what the hole measurents are and they don’t match suggested settings. So where are they getting these numbers from if even the radar product doesn’t line up?

[bigtex2011]

Im running a reflex with all slots(no hole). I use the micro adjust to keep it in place.

 

Hope that helps.

 

 

[bigskieridaho]

I had to move the boot back from the stock setting one hole. Seems the Vapor likes that better. Long shallow, but had to drop the fin down in front to get the offside turn dialed. I have my settings written down if you want them. I’ll have to get them next time to the lake lake tho.

[C5Quest]

Sure. Shoot me your settings. For a 66? I think I have a micro adjust somewhere in my pile of stuff. Just never got around to installing it. Time to break that out

[bigskieridaho]

@C5Quest you might want @Chris Rossi @eddie_roberts_jr or @brooks to chime in on this as well.

[C5Quest]

Hopefully they see this thread

[skialex]

Install the mikrojust, you will only regret that you haven't used it yet. It's a must for precision ski setup.

[ColeGiacopuzzi]

@C5Quest I use a reflex In the front and mikro-just. On 2018 66" for deep and short give these a try and let me know what you think. Hope this helps.

 

29 3/8

6.832

2.510

.765

9

 

[brooks]

Hey @C5Quest we use the Carbon Sequence Plate which gives you micro adustibility. Our Standard Sequence plate also offers 1/8” adjustemnts. Email me, brooks@squareoneco.com, if you need help getting dialed on the ski.

[C5Quest]

Actually I just picked up Carbon Sequence plate last time I was down at Perf Ski. I m running reflex right now so I’ll try the mikro-just first. I’ll mount up my vapor boots to play around with after I dial in the reflex. Look forward to getting trying a couple option. So far this ski is amazing

[C5Quest]

Anyone’s using Mikro-just on both front and rear bindings? I keep my back foot as close as possible to the front. Almost touching the heel. Rear only has 1/4 adjustment hole pattern. Then again moving my front up an 1/8 or 1/6 shouldn’t create that big of a gap