-
Posts
1,196 -
Joined
-
Last visited
Content Type
Forums
Profiles
BallOfSpray Posts
Events
Downloads
Store
Gallery
Quizzes
Posts posted by Deanoski
-
-
@Rob. What setting would recommend for a
-35 34mph skier
-
Stoke I had the same issue last yr with the s lines it was the spongiest rope I have ever used.
Im back to using M/L
- 1
-
-
Horton. Med or large
and setting?
-
Question,
I have heard both sides. Just looking for more feed back
does to much lake dye make the lake ski bad ?? Or good?
-
Get him a medium HO. Works 02.
- 2
-
All bindings need forward pressure
just because it works does not mean its set up properly
always double check the heel forward pressure. You should not be able to pull the release off the block when engaged
also check dock test the DIN setting often the stainless steel springs will compresses over time and will release at a lighter tension Then originally setting you had
- 1
-
Problem fixed I got a HO. Works 02
- 2
-
I will follow this thread
great stuff IMO
-
I think it’s awesome tune away
you have about 2-3 mm of material to play with
I have sanded many skis over the yrs and I know a few skiers that also sand bevels
- 2
-
Lots of snow ski brands sell roller ski bags.
- 1
-
I used a reflex for 12 plus years
then I day 3 rd pass -32. Prereleased
dam near killed me. Air flight ect
I now ski a T factor.
I will never pre release. Again
tje only other option I see is a radar boot mounted directly to the plate.
the reflex heel release is tech from
WW 2
Deano
- 2
-
Lot of skiers have been cutting flattening. Punching the shell just as you would do with a snow ski boot
- 1
-
get the standard blk boot with the standard plate.
I have never seen a high end skier using the new DC and only a few skiers on the white stiff boot.
get the proven blk boot. or better yet get a D-3 T factor and just ski!!
- 2
-
@kc you are correct!
- 2
-
I was on the pro last season and switched to works 02 this season started on a 67 large
I im 5'11" 180 run switched to the 66 in mid june ran -35 more than I have in years awesome ski easy on the body compared to the XTR cc i tried during this time. always turns and gets great angle and more important to me is it builds into the wakes and cast you wide and early.
boot and fin setting on 66
T factor FB 29 3/16
willey rear 17 3/16
6.840 2.483 75.5 9 wing
Works 02 is a home run and you should try if you get a chance or if your coming off a pro it just easier to everything the pro Is a technicians dream when you are 100% on
The works keeps going when The technician is not perfect.
-
Imo. Direct connect Bad idea
its even harder to set up and no micro option.
I would Just get the standard plate and Blk boot.
my. 2 cents
- 1
- 1
-
A lose willey rear boot is very popular.
wlley's also makes a 3/4 rear boot.
it's not on the web but I know that have them available or they can make them.
-
Im just a wally but we ski 4 different SN 196 reg and 6.0 engines and a 200 with 5.7 ski them all at A2
newer MC 6.0 c-1
new malibu with the big Moter A-3
we are at 3,000 feet elevation.
- 1
-
-
Buy the radar boot
- 1
-
-
Imo A. Moass ski always turns gets angle but not to much Carry’s off the second wake and Slows down
-
HO. Dry flex tops and suits are great and very durable
Animal Binding Repair
in Skis Fins Bindings
Posted
Call Willey’s and get a new wrap. With no laces