Baller Skihack Posted July 12, 2013 Baller Share Posted July 12, 2013 How are you guys attaching bindings to the G10 Plate? I have tee nuts which have prongs but I do not know if the prongs will penetrate. Do you tap the holes in the G10 Plate? At 1/8" thick I am thinking there would not be enough threads there. Another way would be to countersink the bottom and put screws up fromthe bottom and put bindings down securing with a ss nut. What works best? Link to comment Share on other sites More sharing options...
Baller A_B Posted July 12, 2013 Baller Share Posted July 12, 2013 I drilled and countersunk holes and ran screws in from the bottom. No problems. Link to comment Share on other sites More sharing options...
Baller KcSwerver Posted July 12, 2013 Baller Share Posted July 12, 2013 Also Countersunk holes and screwed from the bottom with regular washer and nut on top. Held all my stuff great Link to comment Share on other sites More sharing options...
Baller teammalibu Posted July 12, 2013 Baller Share Posted July 12, 2013 Ditto with AB and KcS!! Link to comment Share on other sites More sharing options...
Baller A_B Posted July 13, 2013 Baller Share Posted July 13, 2013 I have Strada boots mounted direct to the G10. Sounds like how are talking about mounting your standard plates to a G10 with a nut on top, right? I even mounted Animals to G10 directly. Just used the plate holes to mark holes on the G10, then drilled the G10 plate and countersunk holes and screwed directly into the binding frame without a metal plate. Lots of work on that one. Stradas have 5 holes to drill for,each boot. Link to comment Share on other sites More sharing options...
Members acmx Posted July 13, 2013 Members Share Posted July 13, 2013 The Goode G10 Plate Comes With Small Threaded Inserts That Press In From The Bottom Of The Plate, So You Can remove your Binding Without Peeling The Plate Off The Ski. Link to comment Share on other sites More sharing options...
Baller A_B Posted July 14, 2013 Baller Share Posted July 14, 2013 To me, it was about taking the metal plate off so the ski would flex better. I don't know if this is true or not or worth the effort, but seemed to make sense. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now