Alarm & Gauges

[skihard]

I have a 2005 SN 196LE and yesterday had an alarm go off constantly in my tach. Wife was driving nothing out of the ordinary. When I climbed in the boat I thought it was my Perfect Pass going off but noticed the led light was constant red in bottom of the speedo and none of my gauges were working. ie: oil pressure, temp, etc.

 

I looked but couldn't find anything in my manual about the alarm or what might be causing it plus all my dash gauges to not be working?

 

I'm a fair drive from any Nautique dealer and was wondering if anyone else on here has experienced this issue or if anyone might have an idea as to why?

 

I first noticed the oil presssure gauge wasn't working so right away checked oil level in boat and it's perfect and right where it should be?

 

Any help is greatly appreciated!

[Waternut]

Sounds like the battery voltage dropped due to alternator belt coming off... It's worth a quick look anyway. If the belt is still installed and tight, check the battery voltage with a voltmeter and/or recharge the battery and see if it still happens.

[estrom]

I would check fuses as well.

[ForrestGump]

LE gauges are driven via a canbus serial interface off of the engine ECU via a gateway box. If all the gauges have gone out you've either had a issue with the gateway box or the canbus cable. The gateway box in an 05 is in the trunk behind the back panels.

[skihard]

Thanks for the help guys. Will hopefully get a chance to look at it late this week.