sandrozaal Posted September 13, 2014 Share Posted September 13, 2014 Hi After couple of years skiing on HO A1, I noticed that the surface is not that smooth as it was at the beginning. I wonder, if its possible to refresh it somehow..? Polishing maybe..? No significant scratches or other damages. Please advise Thanks Link to comment Share on other sites More sharing options...
Baller liquid d Posted September 13, 2014 Baller Share Posted September 13, 2014 polish it with a buffer and good wax....and then get a video of your first set on it! Link to comment Share on other sites More sharing options...
Baller Drago Posted September 13, 2014 Baller Share Posted September 13, 2014 @sandrozaal he's kidding. You don't want oils or wax on a water ski. Try soap and a green Scotcbrite Link to comment Share on other sites More sharing options...
Baller Deke Posted September 13, 2014 Baller Share Posted September 13, 2014 @sandrozaal don't go too crazy either. See the current thread about changing the bevels. http://ballofspray.vanillaforums.com/discussion/11714/modifying-the-bottom-of-a-ski#latest Link to comment Share on other sites More sharing options...
MrB Posted September 13, 2014 Share Posted September 13, 2014 Wipe it down with microfiber cloth after every use. Remove liner and let it dry after every use. Do not wax bottom. I use Mcquires No. 9 on the top once and awhile, but if you wipe it consistently it always looks good!! , Link to comment Share on other sites More sharing options...
Administrators Horton Posted September 13, 2014 Administrators Share Posted September 13, 2014 I would not do anything to a ski that works. Goode ★ HO Syndicate ★ KD Skis ★ MasterCraft ★ PerfSki Radar ★ Reflex ★ S Lines ★ Stokes ★ Baller Video Coaching System Drop a dime in the can Link to comment Share on other sites More sharing options...
Baller skialex Posted September 13, 2014 Baller Share Posted September 13, 2014 Whatever you do, do not polish the bottom. If you feel that you need to do something, use dish soap and scotchbrite lightly and from tip to tail, be careful not to overdo it and change the bevels. Good luck, Alex Link to comment Share on other sites More sharing options...
Baller eleeski Posted September 13, 2014 Baller Share Posted September 13, 2014 40 grit! The texture on the bottom does matter. But too smooth might not be best. Many factory skis came with a fair amount of texture. Polishing is more different from your original ski than wallboard texture. @Horton is right, don't mess with a ski that is working. If it's not working, I'd add a fairly rough sanded finish way before polishing. I actually do texture with 40 grit. My texture fades noticeably and the retexture does improve the feel. Eric Link to comment Share on other sites More sharing options...
Baller klindy Posted September 13, 2014 Baller Share Posted September 13, 2014 @sandrozaal top surface or bottom surface of the ski?? What exactly do you intend to "polish"? Link to comment Share on other sites More sharing options...
Baller A_B Posted September 14, 2014 Baller Share Posted September 14, 2014 Flat black primer. The old example dragging a drinking glass over a wetted surface and the amount of stick that a shiny smooth surface creates is not what I think is desired in a ski bottom. Link to comment Share on other sites More sharing options...
Baller skialex Posted September 14, 2014 Baller Share Posted September 14, 2014 You can cover scratches sand them and spray the bottom with Black SEM Clasic Coat (or any other Clasic Coat colour you like). If there are no scratches you can use clear coat. Wash it with soap and scotchbrite sponge and you'll have a really nice newish bottom ski! Link to comment Share on other sites More sharing options...
Baller cragginshred Posted September 15, 2014 Baller Share Posted September 15, 2014 The lake I ski at is pretty muddy. Every few weeks I use a little vinegar on a towel to wipe down the layer that builds on my ski. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now