Baller BCM Posted August 2, 2016 Baller Share Posted August 2, 2016 So, I bought a 98 CC this winter. I did a pretty good inspection before bringing it home. But, I missed the little bit of JB weld on the bottom of the exhaust manifold. Its time for new manifolds. Do people generally replace the riser as well at this point? Besides manifold and gaskets is there anything else I need (e.g. my old Ford diesel required needed new bolts when pulling the old manifold)? Anything I should be checking while I have the manifolds off? Any help would be appreciated. Has anyone had any luck sourcing manifolds through an auto parts store? My local Napa is pretty good with my tractor and pickup stuff, haven't tried boat parts. Thanks. Link to comment Share on other sites More sharing options...
Baller bishop8950 Posted August 2, 2016 Baller Share Posted August 2, 2016 I just put new manifolds on a 2000 Malibu that had 2 seasons in salt water. The risers looked pretty rough so I replaced them as well. Got the parts (risers, manifolds, gaskets, new bolts and new hose connectors) through Discount Inboard Marine. Www.skidim.com Link to comment Share on other sites More sharing options...
Baller herseyj Posted August 2, 2016 Baller Share Posted August 2, 2016 Skidim and NautiqueParts are great sites for CC parts. You'll need gasket kits for the manifolds . They are standard Ford 351. Aduming you have a GT40. Shinny side out. Looking at the riser should be easy once off. You'll need the riser gasket. Check the inside of your exhaust hoses and look for blisters. Exhaust hoses should be stiff when you squeeze them. If their soft it might have over heated and blistered them at some point. The bolt kit isn't expensive. The riser bolts may break. That is common. The manifold bolts are usually solid but you may have one or 2 that have a little rust on the area between the threads and the head. Link to comment Share on other sites More sharing options...
boarditup Posted August 2, 2016 Share Posted August 2, 2016 Complete bolt, nut, and washer replacement with appropriate coating of high-temperature anti-seize is highly recommended. Link to comment Share on other sites More sharing options...
Baller Orlando76 Posted August 2, 2016 Baller Share Posted August 2, 2016 + 1 for SkiDim, great people. Easy job but expect the bolts to break. The best anti seize is 50/50 ATF and Acetone. Link to comment Share on other sites More sharing options...
Baller BCM Posted August 2, 2016 Author Baller Share Posted August 2, 2016 Thanks. I'll plan on everything new between the head and the hose. I have used Nautique parts and SkiDim for various parts with good luck, but I do like to find things through the local parts store when possible. Bolt issues are normal. I'm getting started on a complete engine overhaul on a '47 Ford tractor (2n), that has some bolt issues... @rico - my brother dropped a bolt in the intake manifold of his truck when he was 16 while replacing the manifold for a smog legal one. Didn't know where the bolt when until he started it. It was amazing how many cylinders pieces of the bolt made it in to. Are you suggesting there is a market for used manifolds? Would have never thought about selling manifolds with holes in them. Link to comment Share on other sites More sharing options...
Baller_ Jody_Seal Posted August 2, 2016 Baller_ Share Posted August 2, 2016 Will gladly drop ship you your manifolds and service items. www.floridainboards.com I have an 8N I am putting into the shop for restore, sliding a flathead v8 in mine. Link to comment Share on other sites More sharing options...
Baller Orlando76 Posted August 2, 2016 Baller Share Posted August 2, 2016 I should say the best Penetrating Lubricant is the 50/50 brew, not anti seize for bolts, plugs, etc. Link to comment Share on other sites More sharing options...
Baller BCM Posted August 5, 2016 Author Baller Share Posted August 5, 2016 @Jody_Seal - I will give you a call in the next week or so. Thank you. I'm keeping the 2n relatively stock and doing a full rebuild kit, bottom to top. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now