Baller DaveD Posted July 5, 2017 Baller Share Posted July 5, 2017 My glove is starting to tear so I'm looking for advice on a repair. The material that is tearing is thin and looks to be some sort of synthetic leather. I'm afraid to sew a patch on it because the thread holes may create new tear initiators. Would a flexible epoxy glue work? Link to comment Share on other sites More sharing options...
Baller igkya Posted July 5, 2017 Baller Share Posted July 5, 2017 Stitch it and forget it. Order a new pair cause those won't last much longer and that way you'll have a pair ready to go. Link to comment Share on other sites More sharing options...
Baller Ilivetoski Posted July 5, 2017 Baller Share Posted July 5, 2017 Are those the syndicate legend gloves? Looks like them because of the palm. If they are mine didn't last long at all, had to just buy a new pair of gloves. Link to comment Share on other sites More sharing options...
Baller Broussard Posted July 5, 2017 Baller Share Posted July 5, 2017 I love the HO gloves, but they don't seem to hold up very well. . Link to comment Share on other sites More sharing options...
Baller DaveD Posted July 5, 2017 Author Baller Share Posted July 5, 2017 They are Legends. I like the gloves and don't really want to spend more money on a new pair if the same thing is going to happen. If this is the only issue with the gloves, there should be a way to patch it up and stop the tearing. Link to comment Share on other sites More sharing options...
Baller gmut Posted July 5, 2017 Baller Share Posted July 5, 2017 Take it to your local shoe repair... they will do a great patch job..seriously!! Link to comment Share on other sites More sharing options...
Baller ALPJr Posted July 5, 2017 Baller Share Posted July 5, 2017 I'd stitch it with a little thread or floss. Link to comment Share on other sites More sharing options...
mikey Posted July 5, 2017 Share Posted July 5, 2017 Get you a pair of Stokes gloves. They are a thinner glove but hold up well. They cost $50. Good price point for what you get Link to comment Share on other sites More sharing options...
Baller_ lpskier Posted July 5, 2017 Baller_ Share Posted July 5, 2017 If you get your gloves soaking wet before you put them on, they will last a lot longer. @Broussard Au contraire! Two pair of HO 41 Tail gloves will get me through the year and while I don't really keep track, I bet that's like 150 sets plus per pair. (I ski year round). And I wear them very tight, with glove liners. I have an average size hand and wear a small 41 Tail or a medium master line. Getting them wet first is really the key, I think. Lpskier Link to comment Share on other sites More sharing options...
Baller DaveD Posted July 5, 2017 Author Baller Share Posted July 5, 2017 The red and black 41 Tails were bullet proof. Haven't like the fit of the ones since then. I'll remember to get them wet from now on. Found a shoe repair shop near the office. Going to stop by at lunch tomorrow to see what they say. Link to comment Share on other sites More sharing options...
Baller Broussard Posted July 5, 2017 Baller Share Posted July 5, 2017 @lpskier I do get them thoroughly wet before putting them on. The original 41 tails (black and white) blew out along the side seams. The second generation (red and black) lasted really well and I got a lot of use out of them. The third gen (yellow and black) were cut differently, and I didn't use them. Now, the new ones are black and silver and every pair that I have seen, the grey material around the fingers pulls and mine actually started splitting at every point where the palm attaches to the upper glove. . Link to comment Share on other sites More sharing options...
Baller Ed_Johnson Posted July 6, 2017 Baller Share Posted July 6, 2017 You can get Iron On patch material at Walmart. Simply cut a piece to fit the area, larger than where the holes are, and iron it on, using the irons hottest setting. I have been doing this for years and doubling the life of the gloves. Link to comment Share on other sites More sharing options...
Baller cacman Posted July 6, 2017 Baller Share Posted July 6, 2017 aquaseal Link to comment Share on other sites More sharing options...
Baller DaveD Posted July 7, 2017 Author Baller Share Posted July 7, 2017 Since my office is walking distance to a Walmart, I took Ed's advice and tried the iron on patch. That and the patches were less than $2. The patch bonded nicely and my iron didn't melt the glove materials. 2 sets last night and it seems to be holding up OK. I'm a little concerned with the edges of the patch lifting up so I may use shoe goo or something like to seal the edges. Link to comment Share on other sites More sharing options...
Baller BraceMaker Posted July 7, 2017 Baller Share Posted July 7, 2017 https://sugru.com/ Link to comment Share on other sites More sharing options...
Baller_ Wish Posted July 7, 2017 Baller_ Share Posted July 7, 2017 +1 for iron on patch. I've used it all over various parts of gloves as well as some older life jackets worth saving for guests. Tip...cut the patch to fit but cut it in some round or oval shape of some sort. Keeps the edges/corners from lifting. Another tip is to make sure you have not left any glue from the patch on the iron. That can come back to haunt you...happy wife...happy life. Link to comment Share on other sites More sharing options...
Baller skialex Posted July 8, 2017 Baller Share Posted July 8, 2017 I wish I knew the iron patch fix sooner B) Link to comment Share on other sites More sharing options...
mopowpow Posted July 8, 2017 Share Posted July 8, 2017 I'll have to try the patch. How will the wax on my iron affect my ski glove? Link to comment Share on other sites More sharing options...
Baller Ed_Johnson Posted July 8, 2017 Baller Share Posted July 8, 2017 Like I said before, I came up with the iron on patch Mod years a go. Posted it on BOS, and skiers like Wish have had great success with it. Never had a problem with wax on the iron. Just move the iron back and forth, and in a circular motion, when you iron on the patch. Don't let it sit "still" on the patch longer than 3 to 4 seconds, or you may melt the patch. That is how you would get wax on the iron, because you want to use max heat. You need to work the tip of the iron a lot. Good Luck !! PS: Also works on liners, vests, etc. Link to comment Share on other sites More sharing options...
Baller skialex Posted July 8, 2017 Baller Share Posted July 8, 2017 @Ed_Johnson, wax from waxing alpine skis not from overheating the patch :) Link to comment Share on other sites More sharing options...
Baller skibug Posted July 8, 2017 Baller Share Posted July 8, 2017 +1 on the iron on patch, but...then I coat it with a thin layer of aquaseal. If the hole is really small or it is just a seam stretching (not busted open) I will just coat the seem with aquaseal....you can get a large tube of it on Amazon. It will last you a year or more. Link to comment Share on other sites More sharing options...
Baller skibug Posted July 8, 2017 Baller Share Posted July 8, 2017 By the way, I also use the iron on patch and aquaseal to patch up boot liners too...no duct tape or anything like that. Aquaseal is the bomb!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now