Jump to content

JuanJ

Baller
  • Posts

    29
  • Joined

  • Last visited

Personal Information

  • Preferred boat
    Ski Nautique 200
  • Home Ski Site
    Valsequillo
  • Real Name
    Juan J.
  • Ski
    Radar Vapor
  • State
    Puebla
  • Tournament PB
    36 4@32off

JuanJ's Achievements

Apprentice

Apprentice (3/15)

  • Conversation Starter
  • First Post
  • Collaborator
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. Hi everyone, what would be the best propeller for a Nautique 200 with 6.0 liter engine at 6800 feet above sea level to ski at 36 mph? Has anyone done any other tests?Thanks for your support.
  2. Hi Richard, I think its a little small for me, I would need a 67" or 68" Thanks for your message.
  3. no local shop where I live... so maybe a ski demo trip should be planned?
  4. I have been skiing on a 2017 Radar Pro Build. Which ski would you recommend? Currently running tournament PB - 5 bouys at 32 off 36 mph, practice PB - 6 bouys at 35 off at 36 mph. I weight 182-187 pounds. 5 feet 11 inches tall. I was planning on buying a 67" or a 68" ski Thanks for your help
  5. How about two mirrors? You can watch both sides of the turns and the center of the course for alignment.
  6. Our 200 OB Nautique works better with the blower on at altitude. (7000 feet above sea level).
  7. We changed the relay and everything works well now. It is located behind the panel on the drivers feet. Next to the breaker box. Thank you everyone again for your help.
  8. @jimski Thanks for your comment I think we found the problem. We used @skihacker method and only 6 volts reached the panel. Removed the relay and it’s burned. Thanks everyone for your help we will change relay and let you know the results
  9. The boat work well for 4 weeks... I think corrosion is the issue thank everyone for the comments and help
  10. Is there a way to test the keypad with out a new one. I’m that there might be an electrical issue that could damage the new one. How does the power go from battery to 3 way switch to keypad to engine to starter ?
  11. @BraceMaker sorry I did not understand could you clarify please
  12. @oldjeep Boat did not sink because the boat lift was underneath.... we took all water out and sprayed everything with Wd40. No connections on engine side were underwater the ones we saw ...Only a couple next to accelerator might have been but been below water we unplugged and cleaned no rust there... Sorry for bad grammar
  13. Only the starter water around 5 inch above floor ??‍♂️
  14. The battery is around 6 months old
  15. Thank you everyone for your support. I think I’ll have an interesting weekend testing.... @jimski how does the relay is located so you think you could share a picture. Forgot to mention the boat took a lot of water the other day 4 weeks ago but worked fine the last 3 weeks.
×
×
  • Create New...