FOB69

@epnault : Did you have problems to setup the reflex front plate position ?I have a 2019 67" Graphite, and the inserts are two much forward i cannot set up the front shell at stock position (30 1/2) even with plate backward at its maximum, i had to file the plate holes for this and this is worse for shallow setup (30 1/4)This is confusing it seams i am the only one to have this problem.Reflex confirm to me there is only one plate patern so it is not a plate probem. Other thing : I use to have a pulse radar boot in 2019 when i bougth the senate.I had a very good lateral leverage but after two small accidents i gave up the non release sytem and had an other ski with reflex for a while.I just mount now the reflex on the senate (white cuff shell), and i find i have not a so good lateral leverage than with the pulse (ski too wide for reflex system ?).So considering this and the mounting problem, i ask myself if the senate is reflex compliant ... B.

hiDoes someone tried reflex bidings withthe senate ? B.

Yes. White cuff boots size 8 and standard G10 front plate.

@condorpilot : On the 67 you are 30 1/2 with the last hole or penultimate ? (i am 30,6 with the last one) Would my senate have an issue on inserts positions ?

I just try to use the last hole (under the nut). I am 30,6 instead of 30 1/2 (Senate 2019 67).

@condorpilot : thank you very much. You have the 67 one ?

@Deanoski. « If you don't slot the rear holes and use the holes in the plate « What do you mean ? Bernard

Hi, i have tge same issue with my new senate graphite 2019 67. The recommanded stock position for front binding is 30 1/2 and i can’t set it up without usign the last hole under the nut (not even sure it will be enougth at the rear with this one). Is it normal that the reflex Plate is so much at the rear with the senate ?

Hi, What is the reference for the boot placement with reflex slalom boot on the senate ? Binding plate position is not the same with my radar profile boot and reflex boot if i take the rear toe of the boot (reflex plate will be much more on the rear). Reflex binding is probably thinner than radar profile so i have a doubt. With the Tfin setting above, if i take the toe of the reflex boot as a reference i cannot set 30 1/4. The less i can do is 30 1/2 using the more rear screw position of the plate. Thank you for you advices. Bernard

Hi I had a radar union and uprade this summer to a MC 2014. I mostly do open water. I did lay down great on side turns with the radar but with the weight most on the rear leg. Off side turns were corrects. The MC seams to performs with the weight on the front and my off side turns are smooth and long (much better than with the union) but i have a problem with on side. The ski engages and turns at once when i push on the edge and i cannot lay down the turn. If i under turn to take more angle like i did with the radar, the ski edge plunge and i fall. It seams the issue is fixed if i add angle to the fin wings (that is in stock setting); but it's too painful for my old arms. I did test several positions on front binding that is now just 3mm back to default position. More at the rear i sit back at once crossing the wake. What can be wrong with my turn or setting (sorry i have no video). should i move the fin backward to get more drag ? Thank you for your advices. B.

What king of snap bushing do you use in the tube holes of your homemade Handles ?

Hello, What would be the best plan for a fammily school week in the seatle area next summer (we won’t have boat) ? Bernard

I don’t see how a micro adjust would solve the problem. I won’t slide anything with discret holes at the rear.

And feedback after changing the bindings?

Hi, I need to slide my new front reflex binding 3mm back. I have to use the back holes of the reflex G10 plate with the back inserts of the front binding, and there is a 6mm gap between each hole. I must cut the holes with a dremel to join them ? This must be a very common problem no ? Thanks, B.