-
Posts
1,611 -
Joined
-
Last visited
-
Days Won
4
Content Type
Forums
Profiles
BallOfSpray Posts
Events
Downloads
Store
Gallery
Coaching
Quizzes
Posts posted by skialex
-
-
Tilt the ski to the left a little if you are LFF and Vice versa. Rope should still be touching the side of the ski when getting out of the water. When you get used to the hard shell you would not need to do that, that much anyway.
-
@wettek69 honestly couldn’t though of that… maybe you have to go the diy route, cut the horseshoe in two pieces to widen it, find a source for a rubber sheet and use the standard one as template but make it wider, or split the standard rubber and reconnect it with maybe a leather piece to make it wider. I guess the standard heel squeeze piece can be used as is. Modifying it can really hard.
-
If you are talking combo skis.. bindings come in two pieces each. All you have to do is to spread them apart. By how much, I’m not sure, use foot as template. Somewhere between the original screw holes, there is definitely enough space to drill some new and use the old ones for guide and measurement purpose.
-
I had so many sets for March, that I feel I’m done… taking the rest of the month off…. Or… not…🤗
- 1
-
Give the guy some slack…
do not discourage newcomers, ok this was too much, but still, suggest him to follow the threads, learn the rules of the forum and encourage him to be a part a great community.
- 2
- 1
-
@Deanoski I liked what you wrote and yes reflex need forward pressure to eliminate play and risk of prerelease and also testing outside is important and the concerns about the ss springs. But in the HO system the shell stays put because of the base that it sits in and can stay in place with less forward pressure and still work fine. It is just a little more difficult to adjust it when it develops more play than it should.
-
-
Florida or bust!
6 hours to take off…!
- 1
-
24 minutes ago, skialex said:
Last summer, on the way to SanGervasio. Ski tip was damaged, I took pictures at the airport and left so I would not miss my ski set.
Send a Mail to the airline explaining everything, with photos, an invoice for the tube and a link to the manufacturer’s site of the ski and its cost. I’ve got a reimbursement that covered the ski and tube.repaired both…
Skied that week and bought new ski after that. Sportube… I’m still using the same one.
-
Last summer, on the way to SanGervasio. Ski tip was damaged, I took pictures at the airport and left so I would not miss my ski set.
Send a Mail to the airline explaining everything, with photos, an invoice for the tube and a link to the manufacturer’s site of the ski and its cost. I’ve got a reimbursement that covered the ski and tube.repaired both…
- 2
-
9 hours ago, Horton said:
@101driver I think you'll find a direct relation to a skier's average score and the two sins that you describe above. The average 15 off skier has no idea where their ski is set up and the average 38 off skier might be able to give you their settings without even looking them up.
@Horton Nailed it….
-
@whitem71mine doesn’t work either and I don’t upgrade if not needed.
the message is that it has been removed from the AppStore.
for me that I set up skis for a lot of people’s skis and older models, was very useful.
i hope it will come back.Any advice on how to make it work again, if it’s on my end is vey welcome.
-
-
@Horton Kyma means wave in Greek, unless It’s an acronym… they named their boat “Wave”
just sayin…
- 3
-
6 minutes ago, Horton said:
Ahaha…. My first…
- 1
-
6 sets so far… getting in ski shape..
-
This is sad news, but could also be an opportunity for someone else.
there is always money to be made in niche markets. Maybe a smaller size lower cost company can take over and build a ski boat, or Malibu can licensing the hull to somebody else.
Anyway, if Malibu stops producing ski boats… let’s hope not…. And there is money to be made… hopefully somebody else will step in.
-
https://m.youtube.com/watch?v=Ahk48h7P4ts
Chuck Patterson is the guy
- 1
-
There is at least one guy, maybe more, that is an alpine skier and surfer I think, that have skied waves in style. Skis were combos, but he had snow ski boots and ski poles.
-
This is sad…
-
1 hour ago, Broussard said:
When you decide to jeopardize your entire career and reputation by crafting an elaborate system to decrease the width of the turn buoys in order to win and set records.
This is what I thought it would be about when I read the title
- 1
-
@boscoman it’s not the thickness, it’s the model, change to a top of the line O’Neill like Psycho Tech 3/2 or similar and you won’t need any layers underneath. For upper 50s and higher, this is all you need. Zero leaks for the first 3-4 years or more, stretchier than the Epic and warmer. You can go for a 4/3, but for upper 60s there is definitely no need.
Both my Psychofreak and psychotech are leaking now, but still comfortable at upper 60s. Need to buy new, have used them for way too many years now and don’t think there is any life in them anymore.
I could do 50 when they were new. -
12 minutes ago, scoke said:
If you have any interest in coming down, day trip or other and skiing Okeeheelee for a day, let me know as you can ski our boat or potentially I can arrange a pull for you. We've got a 2019 200 with a 6.0L.
The water has been around 70 right now and should be 70-74 by then. Most folks are just wearing tank tops under vests.
We have an apartment you can stay in if you were overnighting, that one I have to check and make sure msscoke doesn't have someone else scheduled in it.
Let me know. or Next trip!
@scoke thank you very much for the offer, I really appreciate it! I will be with a friend. We are planning to go south for a day or two and visit Okeeheelee too, to at least see the place.
I will contact you if we do, to meet and show us the place and if possible have a set.thanks again… I miss the awesome button…
-
Hope so too… cause I’m coming to central Florida for 2 weeks end of February.
I’m trying to stay in ski shape, but it’s cold now in Greece, hope this will change in the next week.
had 9 sets in January, which is more than usual- 1
Feasibility of 3D printing custom VersaTail
in Skis Fins Bindings
Posted
You would need to use a material that withstand the pressure and most importantly the sun heat. Definitely don’t use PLA or PETg. They might coop with the pressure if not over tightened, but heat… they won’t cut it…