Doug
-
Posts
52 -
Joined
-
Last visited
Content Type
Forums
Profiles
BallOfSpray Posts
Events
Downloads
Store
Gallery
Quizzes
Posts posted by Doug
-
-
Wish they are on Quest 45 not H2
-
Eric where's the boat at?
-
I have a brand new green 404 that I will sell cheap never used still in the bag
-
I have done 4 2000 C/C 1998 should be the same pulled the GT 40 out dropped brand new 343 excaliber bob tail from PCM from start to finsh 5 hrs including installing the ZO I have pictures i will post them
-
You need a E.Com cable to down load the file plus a password you will need to down load the software onto your laptop its not as EZ as uploading a program where are you located?
-
The ECM that you see on bakesonline is the wrong one you need a three header mefi 5 replacement i just did a 2008 Malibu's last month you can call me with any ? 909 223 4427 i have done 5 malibu's now
-
Its your low pressure pump I have had 2 customers boats do the same thing change out the Carter pump you will be $$ Call Vince at SKIDIMS he will send one out the same day
-
You can also retro your 05 with ZO very EZ
-
Sorry not Santana Carlos doesn't live there it's Santan
-
Santana lake in Queen creek,Lakeside in He la Bend,Crystal Point in downtown Gilbert There is also Spring Mountain ski ranch also in He la Bend no houses yet also Buckley lake but you will have Dave as a neighbor just saying
-
Make sure they put the right file in the head unit if it is a 200 C/C it should have 016A if it is 196 09A The 200 is what we call a compound mount file if they are installed wrong your boat will do just where you are saying on that note the only way this can happen is if someone did a override when installing
-
You also need a password and the serial number on the head unit
-
Horton
Hit it on the head on a demo weekend I may set up 10 to 15 skis changing out binding I will use a screw gun to take out the screws after loosening them also for the people that grab the tip of the ski and pull it off after there set thats a no no and don't forget the binding string you tighten before your ride take the time reach down and loosen it this will also help the insert and the plate last longer
Only my 2 cents
-
The record will fall this year 3 more 41s ran today in Florida at Mccormick's Will,CP and John Travers to many 41s already in the books for 2013
I am saying 3 1/4 this year
we shall see
-
The bars adjust out got this from Seth and Tadd
-
I have a one call me 909 223 4427 powder coated red can also flex jump skis
-
I have some left over from replaceing bad pucks
-
Call Bob Benz 916-638-3382 for the carpet drop in
-
Did you get the plug and play harness peace from Malibu it makes it about a 45min job most of that is drilling and running antenna wires
-
John Hortons house
-
Very EZ your looking at about $8k to $10K plus ZO system $1590.00 better than $55k for new boat you can call our Email Jody Seal he has done a lot of them He can repower your boat in a day if he has all the parts setting there
-
The lenght of the servo cable is all the rest will work
-
Roger
The system is $1590.00 and the E controller is a $850.00 I would like to do the installs myself I can travel anywhere in the country I will work something out on labor
-
05 are not drive by wire and they also run a mefi 4 engine controller it can be done but you have to change wire harness and a lot more parts.
I am installing ZO in a 06 C/C right now and that boat i have to change the engine harness and install a TPS
ZO Surging
in Boat Talk
Posted