Baller nam1975 Posted August 21, 2010 Baller Share Posted August 21, 2010 My PP Stargazer works fine going 1 way thru the course. We drop at each end. The other way it beeps once, but won't beep again and start timer @ entrance gates.It seems to be holding speed ok, and it feels ok skiing.Magnet is still there at that gate. Can magnets go bad? Anyone ever have this? Any hints? Thanks. Link to comment Share on other sites More sharing options...
Baller Ed_Obermeier Posted August 21, 2010 Baller Share Posted August 21, 2010 Especially if there is only a driver in the boat (boat running slightly out of level). My SG false triggers going over turn around bumps so I have to be observent to make sure it's reset before getting to the 55's. As Brent said that magnet may be low; try raising it a bit.Ed Link to comment Share on other sites More sharing options...
Baller Chuck_Dickey Posted August 22, 2010 Baller Share Posted August 22, 2010 Magnets do get weak. When ours get covered in algee/moss growth we have to replace them. Should be strong enough to be sensed 18" under the surface. This depth is just below the prop. Or could just be too low like stated below. Link to comment Share on other sites More sharing options...
Baller Chuck_Dickey Posted August 22, 2010 Baller Share Posted August 22, 2010 Magnets do get weak. When ours get covered in algee/moss growth we have to replace them. Should be strong enough to be sensed 18" under the surface. This depth is just below the prop. Or could just be too low like stated below. Link to comment Share on other sites More sharing options...
Baller_ RichardDoane Posted August 23, 2010 Baller_ Share Posted August 23, 2010 put it in "magnet test" mode and run through the course both ways, that'll tell you if there's a difference in strength Link to comment Share on other sites More sharing options...
Baller Bill Gladding Posted August 23, 2010 Baller Share Posted August 23, 2010 If you have two pickups change them and see if it works the other way. If so then one is bad... Link to comment Share on other sites More sharing options...
Baller nam1975 Posted August 23, 2010 Author Baller Share Posted August 23, 2010 They are pretty slimy...I'll try and change it Wednesday Thanks all Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now