Binding plate dimensions

[epyscs]

Hey Guys - anyone know the dimensions for the hole pattern for HO and / or wileys bindings?

 Cheers!

[LeonL]

A little tough to do but here goes.  Looking at a blank HO the front most pair of holes are 5 7/8" wide, then the next pair are 3 7/16" back and are also 5 7/8" wide.  Then 6 3/16" back from those are another pair that are 4 9/16" wide, then 2 3/16" back are another set of holes that are 4 1/4" wide.  Now it gets tough as I don't have bindings only the blank ski to look at.  Moving back 14 5/16" there are three holes the that the rearmost bindings holes mount to.  Since they are not straight across it's hard to measure.  Someone with Wiley's or HO bindings will be able to give you better figures, but maybe these will help.

[epyscs]

Cheers leon - that's really useful... now to find the wileys ones!

 

[Horton]

Everyone in the industry uses the same front binding holes.

HO, O'Brien, Radar, Razor, SansRival.... all use the same back hole pattern. D3 and Connelly use a different back binding pattern.

The problem with Wileys is that the distance from ankle bone to back hole. This can mean that your bindings are too far forward with Wileys -  depending on the ski.