Baller lakeo Posted September 12, 2012 Baller Share Posted September 12, 2012 Is it Just plain crazy to replace a 94 nautique(mint) motor with 1200 hrs with a ZO motor. Can it even be done? Link to comment Share on other sites More sharing options...
Baller ForrestGump Posted September 12, 2012 Baller Share Posted September 12, 2012 Talk to Jody Seal. Link to comment Share on other sites More sharing options...
Baller Doug Posted September 12, 2012 Baller Share Posted September 12, 2012 Very EZ your looking at about $8k to $10K plus ZO system $1590.00 better than $55k for new boat you can call our Email Jody Seal he has done a lot of them He can repower your boat in a day if he has all the parts setting there Link to comment Share on other sites More sharing options...
Baller_ Jody_Seal Posted September 12, 2012 Baller_ Share Posted September 12, 2012 Seems the Re-power idea is catching on. Not going to get a lot out of the "(mint)" pull out but it should bring $1000-$2000 to some one redoing a old classic inboard. if it has perfect pass that too will bring upwards of $600 on the open market. PCM did a great job of thinking about re-power as they have available engine mounts that adapt to exactly where the Ford went. Electric adapters to plug everything into the existing boat harness and convert the fuel tank to a EFI return style tank. In most cases all this can be done even in older boats other then Nautique products for $10K or less (5.7 engines) when it is all said and done. I have now Re-powered MasterCrafts and Malibu's with PCM Excalibur and ZR-6 engines not a big deal! Link to comment Share on other sites More sharing options...
Baller eleeski Posted September 12, 2012 Baller Share Posted September 12, 2012 Any V6 ZO options? My old 79 American Skier came with 225 hp (or 240?). 300+ hp in such a little boat will rip my arms off. A modern V6 should have about the same hp as original in a smaller lighter package. Eric Link to comment Share on other sites More sharing options...
Baller lakeo Posted September 12, 2012 Author Baller Share Posted September 12, 2012 Thanks Jody. I'm in the Northeast so I probably won't be coming to Florida, but maybe I'll be calling you for the whole kit. Is that possible? Link to comment Share on other sites More sharing options...
Baller MattP Posted September 12, 2012 Baller Share Posted September 12, 2012 for a few more dollars just have it shipped to Jody this winter. If you want it done right I could not recommend a better person to do it! Link to comment Share on other sites More sharing options...
Baller_ Jody_Seal Posted September 12, 2012 Baller_ Share Posted September 12, 2012 I have sold and shipped a number of engines across the US and helped owners with this process. Have even jumped on an Airplane and done a couple (outside the US). The farthest a boat has come to my shop came from Via-de Bravo south of Mexico City had the customer heading back with in 48 hours! I even water tested it and took a ski ride with it ZO and all! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now