Baller ALPJr Posted July 11, 2023 Baller Share Posted July 11, 2023 (edited) Were is the measuring point on the new Vapor boot, mounted on the standard Radar aluminum plate? Were the heal of the boot meets the plate, the rear most point a couple inches above the plate? Are people generally using the same holes in the plate if they are just switching from the older Vapor to the new 2023 boot on the same ski? Edited July 12, 2023 by ALPJr Link to comment Share on other sites More sharing options...
Baller ALPJr Posted July 12, 2023 Author Baller Share Posted July 12, 2023 Anyone? Link to comment Share on other sites More sharing options...
Baller skiboyny Posted July 12, 2023 Baller Share Posted July 12, 2023 I read a post that said bottom of the heel. Second hand info. I'm going to try these boots out so been looking. Link to comment Share on other sites More sharing options...
Baller Ski2000 Posted July 12, 2023 Baller Share Posted July 12, 2023 I was told to measure from the lowest point where the boot meets the plate Link to comment Share on other sites More sharing options...
Administrators Horton Posted July 12, 2023 Administrators Share Posted July 12, 2023 yes. bottom of boot Goode ★ HO Syndicate ★ KD Skis ★ MasterCraft ★ PerfSki Radar ★ Reflex ★ S Lines ★ Stokes ★ Baller Video Coaching System Drop a dime in the can Link to comment Share on other sites More sharing options...
Baller skiboyny Posted July 12, 2023 Baller Share Posted July 12, 2023 @horton thanks for confirming. What is your take on the back screw for the cuff? Link to comment Share on other sites More sharing options...
Administrators Horton Posted July 12, 2023 Administrators Share Posted July 12, 2023 @skiboyny you for sure want that screw in there. Use all 3 screws and double check then every once in a while that they do not come lose. Goode ★ HO Syndicate ★ KD Skis ★ MasterCraft ★ PerfSki Radar ★ Reflex ★ S Lines ★ Stokes ★ Baller Video Coaching System Drop a dime in the can Link to comment Share on other sites More sharing options...
Baller skialex Posted July 14, 2023 Baller Share Posted July 14, 2023 I’m not so sure if the bottom of the heel gives you the right measurement. I’m a size 10 reflex and radar, with the reflex shell on… I measure from under the heel block, then I put the radar on and bottom of the heel gives me a bigger number. So at the beginning I used to measure with the reflex and them put on the radar. I’ve noticed that radar feels better if I move the plate 1/8 back. Still measuring at the bottom gives me a bigger number… now that I’m used to the radar I measure midways on the heel and gives me the same number as with the reflex on and measuring under the heel block. I don’t know if this is the best way, but it works for me. Link to comment Share on other sites More sharing options...
Baller ALPJr Posted July 14, 2023 Author Baller Share Posted July 14, 2023 (edited) I see similar results @skialex. When measuring my 2020 Vapor from the lower stitch it’s about ~1/8 less ~29 7/8, than measuring the 2023 from the bottom = ~30” so I’ll stick with the 2020’s for now and play with the 2023s more in the fall. Edited July 14, 2023 by ALPJr 1 Link to comment Share on other sites More sharing options...
Baller alex38 Posted July 27, 2023 Baller Share Posted July 27, 2023 I too am looking at going from old Vapor binding to new and wondering if there is compensation for the measurement the new base is definitely smaller Link to comment Share on other sites More sharing options...
Baller skiboyny Posted July 27, 2023 Baller Share Posted July 27, 2023 On 7/14/2023 at 4:34 AM, skialex said: I’m not so sure if the bottom of the heel gives you the right measurement. I’m a size 10 reflex and radar, with the reflex shell on… I measure from under the heel block, then I put the radar on and bottom of the heel gives me a bigger number. So at the beginning I used to measure with the reflex and them put on the radar. I’ve noticed that radar feels better if I move the plate 1/8 back. Still measuring at the bottom gives me a bigger number… now that I’m used to the radar I measure midways on the heel and gives me the same number as with the reflex on and measuring under the heel block. I don’t know if this is the best way, but it works for me. This would be good news for me. I'm looking for 30" and with the binding holes I can only get 29 7/8. Next stop 30 1/4 Link to comment Share on other sites More sharing options...
Baller BraceMaker Posted July 27, 2023 Baller Share Posted July 27, 2023 Just file out those holes no big deal. Link to comment Share on other sites More sharing options...
Baller skialex Posted July 27, 2023 Baller Share Posted July 27, 2023 @skiboyny try 29 7/8 first, add some 0.005" length if it makes you feel better. Don’t file out the holes, it will make the plate move all the way forward. It can work only if you can make a diy stop, or maybe it’s time to invest in a Mikrojust. You’re gonna love it, best ski tuning tool. Link to comment Share on other sites More sharing options...
Baller Dano Posted July 28, 2023 Baller Share Posted July 28, 2023 On 7/14/2023 at 1:34 AM, skialex said: I’m not so sure if the bottom of the heel gives you the right measurement. I’m a size 10 reflex and radar, with the reflex shell on… I measure from under the heel block, then I put the radar on and bottom of the heel gives me a bigger number. So at the beginning I used to measure with the reflex and them put on the radar. I’ve noticed that radar feels better if I move the plate 1/8 back. Still measuring at the bottom gives me a bigger number… now that I’m used to the radar I measure midways on the heel and gives me the same number as with the reflex on and measuring under the heel block. I don’t know if this is the best way, but it works for me. @skialex I like that you have done a comparison. I've been using Radar vapor front for a long time. I don't have any bindings to compare it too. But I have had it on 4 different skis. Radar says to measure to the bottom stitch. On my Vapor ski I measured to bottom stitch and mounted as per Radar recommended. It was exactly the middle hole and it skied awesome. On the other 3 skis I have always ended up moving binding back of the recommended measurement when measuring to the bottom stitch by 1/8 to 1/4". From what you are saying it sounds like midway of the heel gives you the same measurement as the Relfex so if you were to measure to the bottom of the heal to locate and use the same measurement the Radar binding would be further back than the Reflex as described. So I can't explain why pulling the Radar binding even further back works for me, but I know going forward does not work. Maybe it's the way the boot holds your foot or the angle of the cuff that is the difference for how it skis? Link to comment Share on other sites More sharing options...
Baller skialex Posted July 28, 2023 Baller Share Posted July 28, 2023 @Dano on the older vapor or any other Radar boot I measure from the bottom stitching too. It’s the new hard shell vapor that gives me a little hard time measuring distance from the heel to the back of the ski. Measuring from where the boot touches the plate, gives me a bigger number by more than 1/8 than the reflex, both on the same plate. Still I feel better to move a little back when using the hard shell Vapor over the reflex. Could be the connection to the plate or that the heel sits further forward than other brands… Link to comment Share on other sites More sharing options...
Baller Dano Posted July 28, 2023 Baller Share Posted July 28, 2023 @skialexThere has got to be a better way to place/measure front boot location. I’m pretty good at finding the right spot by feel now. But in the past I am sure I rode several skis for the entirety with a poor setup just because I measured and set to factory measurement. I guess I had just assumed that would be close enough for all bindings brands. For a reference I dug out my old A3 that I rode at factory measurement and decided that ski wasn’t for me. I have a Vapor binding on it. I moved the binding back 1/4” and all of a sudden It feels pretty darn good. 1 Link to comment Share on other sites More sharing options...
Baller vtmecheng Posted July 28, 2023 Baller Share Posted July 28, 2023 A better way has been ask for and examined but here we are still measuring from the back of bindings. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now