Thanks @Jody_Sealand @RichardDoane
i checked everything I could think of.
replaced the CPS with one I had.
completely gone over the distributor .
have 12 v every where there should be going into the coil and the module.
5 volts at the CPS and into the distributor. But no spark out of the coil.
just waiting on the coil and module from wizard lake marine.
I do have a tiny bit of corrosion under the coil module.
if you weren’t looking carefully you’d pass right over it.
Thanks guys
I did hard wire the kill switch.
have been swapping around relays and checking for power. I will put the fuel pressure gauge on next .
I did find another relay under the dash. I will look into this a little more.
Thanks @jpwhit Yes I did the cap and rotor this year. It still should have spark out of the coil.
I checked the plug going into the coil an no power at it.
Seem to have power every where I check fuse box, relays, both d fuel pumps.
still no spark out of the coil.
might pick up a new coil tomorrow and try it.
2011 200 won’t start cranks overbuy won’t fire.
replaced fuel filter and fuel control cell filter. Checked fuel control cell wires and can’t find any thing no fuses popped.and comes up with this code.
any ideas
thanks