I'm hoping y'all can help with a Zero Off (Jump) issue.
Problem - when in Jump mode, the switch is not engaging. The speed control may not be engaging either? This is a new issue, it worked the last time I used the boat at this lake.
Boat and ZO - The boat is a repowered 2002 SN 196 with a 3-event ZO kit (software/firmware is current). Doug Moss did the work, so we know it's solid.
Issue - I recently updated some settings, and now Jump mode isn't working correctly. My biggest issue is that the jump switch isn't engaging. I was poking around within the profile settings, which may have created the issue? I also mapped the slalom course, but I doubt that's related to this issue.
Set up - The jump course isn't mapped, since I'm unsure if the boat path buoys are the correct distance up/down (North/South) course. Their distance perpendicular to the ramp is good.
Solution - If a soft or hard system reset will solve the issue, I'm open to trying it. I didn't set up the system or install the system, so I don't know what config is required after a reset.
Thx in advance for your help.