Jump to content

03RLXi

Baller
  • Posts

    252
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by 03RLXi

  1. Right or wrong I'm using low cost tung oil from DIY store. Less than half the price of marine teak oils.

    Google seems to vary on if teak or tung is more protection, which is more waterproof or penetrates more. All agree teak dries quicker than tung. I apply it liberally, leave it a few days and then wipe off excess. Lasts all season. Google suggests most teak oils are based on linseed oil and have tung oil blended in.   

  2. 9 hours ago, MitchellM said:

    That looks great.  I'm not sure if fuel, oil pressure and volt gauges failed all at once or sequentially.  The engine temp gauge is still working along with the speedometer, tach and the speedo on my PP.  While it would be nice to know the oil pressure and voltage, I doubt the fuel gauge will work (they never do) if I replace.  I will have to consider if this is actually worth the money and effort.

    Shame you don't scan the gauges frequently when driving as knowing if all at once or sequentially would be useful info. Try swapping the gauges on the other plugs to see it that helps.  That'll tell you if gauge, or medallion, or sensor. 

    Heaps of info on themalibucrew.  Also Ron Tanis has these useful history and testing videos.  Your version of course doesn't have the pitot air tubes. 

    Effort to replace with TRD kit is minimal. Certainly less than 2hrs. If in a hurry could be 30 mins. Only you can decide if repairing, replacing stepper motors, replacing gauges, upgrading to TRD etc is worth your time and money or if you take risk and rely on alarms preventing engine damage. Personally I'd not be comfortable without oil pressure. 

    Fuel level fixes are known and common to most boats (replace wire, better earth, replace level transducer). They're just a bit of a hassle to do.

     

      

  3. @MitchellM have the gauges progressively failed, or did the 3 just suddenly all stop working? If progressively it's the stepper motors. If suddenly it's the wiring, plug or medallion. Lots of info on themalibucrew about resoldering the medallion.

    When my medallion MMDC failed I went for the TRD kit. Easy DIY plug in kit and then just a couple of wires to crimp.  Kit cost less than replacing the medallion. Bonus is the kit provides a new multigauge and GPS speedo that are better quality than OEM gauges. Plus I sold the OEM multigauge and speedo to recover a large portion of the TRD kit cost 😁 The TRD gauges have glass rather than plastic face., and because medallion deleted there will never be a future issue with it. If TRD multigauge or speedo eventually fails can get them cheaply. I later fitted a separate Hawkeye 2BX to recover the depth/air/water temp as the TRD speedo doesn't have the little LCD.  I opted for the stainless steel bezels rather than black. I also opted to upgrade my single line PerfectPass to Stargazer. Vey happy with the kit, the quality, the performance and the look of it.

    Before and after photos.

    before.jpg

    IMG_7265.JPG

    • Like 2
  4. Awesome! @Horton I thought that was your intent but do know that some website owners would use a change like this to steer all content through a system where they can 'clip the ticket' and earn a few $. I'm pleased you're not one of them as skiing as a sport already isn't as popular as we'd like it to be.  

  5. 5 hours ago, MitchellM said:

    Great concept!  I selfishly hope this does not cut down on people posting videos here on BOS for critique.  As a novice, I've learned quite a bit from those threads.

    Agree! I've learnt a lot from seeing collective critiques and the discussions that follow afterwards on BOS. It's highly valuable. Get much better feedback via BOS than when ask on facebook pages.  Certainly hope financial drivers don't mean that non professional video discussion will become banned on BOS 🤞

    As I see it this new system is just giving people who want professional coaching good access to it online now that givego is gone. Hopefully it proves to be trustworthy. Users pay and get to hear and see the coaching. I've no issues with their online coaching session being private. It's not like we get to witness on lake in person coaching. Overall it's a good thing as I never get chance to access the international pro coaches otherwise.   

     

  6. Was it an insult? I mean a  ‘tool’ is a useful thing right? 🙂  

    But I’m pretty sure one of the other definitions was intended so I did the dangerous thing and asked Google. Oh dear, there's few possibilities..............

    1. a device or implement, especially one held in the hand, used to carry out a particular function.

    "gardening tools"

    • a thing used to help perform a job.

    "computers are an essential tool"

    "the beautiful Estella is Miss Havisham's tool"

     2. a distinct design in the tooling of a book.

    •  a small stamp or roller used to make a tooled design.

     3. VULGAR SLANG

    "that guy is such a tool"

     

  7. A possible answer is current hours plus one, because something might happen in that hour that dents your dream.

    But most probable answer is its the current hours plus many many more hours of enjoyment, and the occassional expense. Mostly small expenses, some big expenses, but at the end of your life all boat related costs will have been absolutely justifiable 😁

    • Like 1
  8. Well maintained steering makes so much difference! When not moving it should be feather light to turn i.e. easily spin steering wheel lock to lock with single finger. When boat is at slalom speed however the steering wheel will feel 'loaded'. Don't misinterpret that as a problem though, it's not. The rubbers are shaped to do that as it helps driver 'feel' the skier and to drive accurately through the course.

    If the steering hasn't been maintained everything will be stiff and it'll be harder to slow speed maneuver and you'll loose the 'loaded feeling'. Easy fix though, replace cable and grease rudder. See the youtube how to videos.   

      

  9. 54 minutes ago, twhisper said:

    My take... the shorter the rope and the faster the boat speed the more bad habits you are going to accumulate. Learn to generate your own speed instead of relying on the boat or rope. The biggest hurdle in improving skiing is having to break bad habits. Build your foundation with proper body position, and you will go a long way.

    @twhisper Thank you! I've resisted going faster and shorter as I know my stance isn't solid yet. Because of that, and because of some fear 😉 I wrote about it in this post. It even states "get the basics right first as if I didn’t, and if I tried faster, I’d hurt myself."  I feel like I've improved a lot in last couple of years due to listening to the podcast, reading this website, and by working on body position and not bouys. 3 years ago I skied like a half folded pocketknife!   

     

    I will give 52kph and 14.25m a go to see what's being talked about as I've improved a lot since I last tried 52kp[h. But if my body position is at all compromised I'll immediately stop and revert to 46 or 49kph and 18.25m  

    • Like 2
  10. On 3/2/2024 at 6:25 AM, Fam-man said:

    @03RLXi Looks like a beautiful site to ski. What's the boat speed? How do you typically do when in the course?

    Have you ever tried free-skiing at 28off? You may find improved ability to maintain a more aligned stance if not dealing with the wake bump.

    Boat speed is 49kph. That's my normal free ski speed. I do occassionally try 52kph. Given flat water I can run course fairly consistently at 46, and sometime at 49. Have never tried skiing shorter than 18.25m. I'll certainly give it a try. 

    On 3/2/2024 at 7:26 AM, Horton said:

    As with most skiers at your level, you have more intensity before the wake than right behind the boat. You need to not diminish your connection with the boat until right after you pass the prop wash (centerline).

    I'm aware of this however it feels like if I hold the edge longer I get excessive speed and width after second wake. I will give it a try though! Wake fear always used to hold me back from attacking wake but since getting the LXi that's become a thing of the past 🙂 

    On 3/2/2024 at 1:28 PM, jjackkrash said:

    Better yet, listen to all of them, over and over again.  🙂

    I'm doing that. Listening is easy. Implementing is hard! LOL

  11. 4 hours ago, UWSkier said:

    I'd say to have your driver maintain a consistent speed would be a good starting point.  :classic_tongue:

    Initially when reading this I thought "What!!!!!! I've just spent >US$1000 upgrading the paddlewheel Digitalpro PerfectPass to Stargazer 3 event and you're saying its speed isn't accurate enough.............." but then, doh, remembered I edited the video to include some 1/4, 1/2 and 2x speed. I'll repost the real speed video 🙂

    Real speed this time https://gopro.com/v/DkEkk0r9yeaqW

    • Haha 2
  12. Haven't videoed myself this summer but did get this on 18th Feb, just a few days before getting Covid for first time. Covid has sucked bigtime (my wife's first time too and she ended up in hospital) however being home rather than work it has finally given me a chance to get a skiing video online. 

    I'd welcome any technique suggestions. Speed was 49kph. 18.25m. Free skiing and not course as there was another boat using it.

     

    • Like 1
×
×
  • Create New...