teammalibu

Couldn’t pass on it!

First set today felt great!

Very nice house! Empty lot on one side! And MS on the other!

Have they approved the 10ft. high privacy fences yet!

They have never been allowed until MS moved in but I hear they are rethinking it!

My digital  works great in my air conditioned shop!

All I know is there must be a whole lot of thousandths in an inch!!

Dave Miller is Here this weekend and he looks ok on the 02 stroking 39 with ease.

ill have one here today thanks to @jayskiWill give it a rip 

Talking to Drew Ross last fall and he said the first thing he would tell any skier at any level is to start using a rear toe binding. He said it’s the only way to have proper balance. When I skied with Andy Mapple years ago he made one to fit my foot. After 5 of the ugliest passes ever he laughed and said we should put my rear boot back on! I did eventually switch to the Reflex half boot!

Check all 3 fin measurements.

Anybody using one??

If you are using the Vapor boot

with the reflex release make sure to keep an eye on the two screws that are on the toe piece of the boot. Mine were very loose and it allowed  the boot to flex upward and the toe of the boot was able to come out from under the toe loop of the reflex. Made for an ugly crash. I put some red loctite on those screws and will def keep a closer eye on them in the future!

For real dummies I would suggest leaving the engine cover in the open position and trailer it down the highway at about 85 mph. for 5 miles.

Then simply turn around and pick up the pieces on the way back! Seen it done and it definitely works!

One of our Cedar Ridge skiers 

is heading to Idaho and will be looking for a place to ski!

She is a fantastic young person

and a really good W1 skier.

She has skied at Cedar Ridge since she was old enough to walk and runs into 35 off.

She will be living in Lewiston Id.

and working as an Engineer at the Clearwater Paper Co.

Thanks in advance for any info.

Soak em in cider

Triple J ski club in Dallas has a 2015 200 OB for sale at a great price! It’s on SIA.

My dad started his boat repair

career in the mid 1950s and used to say crank em down till they snap and back em off a quarter turn. Hope that helps!

How many hours on the plugs

cap and rotor?

On 4/13/2023 at 7:41 PM, ToddK said:

Any ballers find a solution to having vertical play in the toe when using the Reflex release other than wrapping the front loop with tape or getting a machinist to grind the base of it down a few millimeters? I have extra parts so to make sure it's not operator error, I’ve tried moving the heal release forward, 2 different front loops, 2 different plates and 2 different 840 releases and have the same vertical play in every setup.

I lowered the toe bar on mine

by .030 by making shorter collar washers!

@Thager, and we all know that 

1 is the loneliness number!

I cant say if there are any changes other than graphics but mine is a LP2 and ive had it for a month.

I have to agree my LP2 feels very fast and stable, I am really liking it!

I have the boat video from the 

19 big dog at the ridge! He was here!

After putting my hands on one yesterday and swapping the DC to another ski for a guy, i see issues! The inserts in the ski better be in the exact proper location or problems could exist.

Also the rubber inside the toe piece was peeling away and bunching up inside the toe piece! I am going to take a closer look at the heel clamp as John describes  it may have more clearance for the rear screw on my plate which quite often is in a bad spot.

I may add the heel piece to my existing plate!

@mike_mapplei watched your dad measure the dft on my ski with it standing tail up 5 times and it read within .001 every time!

Man I was there last weekend,

I would love to go that weekend but our Record tourney at the Ridge is the same dates!

I was able to mount a donated electric awning on the west/ lake facing side of our central judging tower. In the late afternoon even the judges toes are in the shade! Happy Judges Priceless!