-
Posts
1,615 -
Joined
-
Last visited
-
Days Won
4
Content Type
Forums
Profiles
BallOfSpray Posts
Events
Downloads
Store
Gallery
Quizzes
Posts posted by skialex
-
-
skied today!!!!
-
I use my iphone 4s for pretty much everything with no issues, it usually keeps me signed in for a long period, I run ios 7.0.6.
-
@mwetskier when in doubt I always measure, heck I have 5 Mitutoyios three 8" one 12" and a dial one and then I have a Slot fin caliper for measuring Goode skis.
I measure a lot but not every time and yes any significant move I can tell by wing inspection and residue marks on the fin.
I do not have the super human power of eye or feel measurement like you
-
Actually eye inspection and a 9.5 gauge is all I need when I'm on the dock to ensure that me fin hasn't move.
-
When I want to be sure that my fin hasn't move and I'm in a hurry I measure length, DFT and use an angle gauge to check the wing (which tells me that depth is right too).
-
I had problems signing in with Internet Explorer and reluctantly changed to Chrome, no issues ever since!
-
@SkiJay you are right, I have both easy fin and Schnitz tool but it only takes a minute to take the wing off and a couple of minutes to put it back on, so I use the speed tools only when in a hurry and usually not on my fin.
-
Skied yesterday afternoon BI about 57, salt water, a bit of cross wind, overall great conditions. I'm going to Kiafas Lake tomorrow for a couple of sets, weather forecast looks great!
-
I have put the fin settings on that ski!
-
Nikos Frangistas!!
-
Greetings for Turkey!
-
@Stathis Ventouris thio you look great!!!!
-
keep skiing as much as I can, snow skiing, running, Enduro runs on my CR500 and hitting the gym as much as possible!
-
I have a machined gauge set from H2Osmosis with 1/2 degrees, it's really great.
-
You can use a spacer under both the boot heel and the Silvretta release so the lift would not change the fit between them.
You can use a 3mm spacer and longer screws, if you want a higher lift you might also need to put something under the middle of the boot to fill the space between the bottom of the shell and the plate but I think that a 3-4 mm lift might be enough.
-
I just wanted to point out that V Type has already reached the edge of ski world and not only one, there was one more available to demo. As far as the story above it is true, the guy is under 17, skis into deap -35@36 comes from an A3 and skis better and better all the time.
-
I set the fin on a 66" V Type 10 days ago and I live in Greece!
The guy went out on the second round of a tournament (first time on the ski) and came back with a big smile.
I think he matched his tournament PB!
-
@wtrskior thank you, I make them my self, I use 2 pieces of fleece fabric and try to find interesting prints and colors to put together.
-
Cut the sleeve of an old neoprene top and put it over your suit.
-
The top two were made out of a wine bottle rack.
-
I would like to ride MC and Warp!
-
I used a foot bead for a year, took it off saw no diference, never used it again
-
A year ago I had a meniscus surgery prior to that and 40 days after I was only skiing -28 or shorter to avoid crossing the wake at -22. The only boat I could ski at -22 or shorter (with no extra pain to my knee) for the first months after surgery was a new TXi.
Best wake, now I feel great behind any of the top brand ski boat!
-
BI does not work for Celsius, but in Fahrenheit last Saturday was 72 and at sea sites where water temperature does not drop that fast was 90. Hopefully it will get better as we have experienced an early and sadden drop in temperature from mid of September till now!
BallOfSpray Dec 14 T-Shirts and Hoodies
in News & Other Stuff
Posted