Baller otisg Posted November 13, 2012 Baller Share Posted November 13, 2012 Here is my antifreeze recirculating contraption. This enables you to run your engine as long as you need to. Thermostat open in other words. This is to make sure the antifreeze is completely mixed throughout your boat's entire cooling/heating system. You can also use it to recycle & re-use your anti-freeze - IF you have an overwhelming & burning desire to go out and freeze your butt off for a New Years' Day Ski @ 20 deg. F - as some crazy Adirondackers have been known to do.... The key to it is to have a one-way valve. So that the hose going to the raw water pump stays full. This will cause less wear & tear on your pump's impeller. Link to comment Share on other sites More sharing options...
Baller_ DW Posted November 13, 2012 Baller_ Share Posted November 13, 2012 Good stuff, thanks for sharing. Link to comment Share on other sites More sharing options...
Baller BraceMaker Posted November 13, 2012 Baller Share Posted November 13, 2012 Very nice! Does yours use any sort of electric pump? Or do you just rely on the "prime" from running to get the fluid going? Link to comment Share on other sites More sharing options...
Baller A_B Posted November 13, 2012 Baller Share Posted November 13, 2012 So I guess you can run this for infinity? Link to comment Share on other sites More sharing options...
Baller Jordan Posted November 13, 2012 Baller Share Posted November 13, 2012 @AB That, is a solid reponse! "Shirley" it can... Link to comment Share on other sites More sharing options...
Baller A_B Posted November 13, 2012 Baller Share Posted November 13, 2012 Don't call me Shirley..... Link to comment Share on other sites More sharing options...
Baller otisg Posted November 13, 2012 Author Baller Share Posted November 13, 2012 BraceMaker - No it just works off of the raw water pump. But that is why it is important to put in the one-way valve so that the column of anti-freeze will prime the raw water pump. Instead of back sliding into the buckets as you liftthe end up and over the gunnel... Here is a better picture - you can use the green covers to increase the anti-freeze to water ratio to lower the temperature range. Or, use them as I did here, on the right, to keep the mixture from splashing out... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now