Adjusting Fuel Gauge

[SpartanSki]

I just picked up a 2014 RLX and the fuel gauge won't go much past 1/4. I'm used to the bu gauges where they weren't the most accurate, on my old sportster I could run the gauge to empty and then it would still have about 8 gallons left in it. But this is a bit excessive. My first run I thought the wake was a bit bigger than when I test skied it, now I know I had a full tank of gas.

 

Is there an easy way to adjust the sender without pulling the tank?

 

Thanks

b

[Doug]

There is no adjustment on those sending units unplug and replace

[03lightning]

Should be 5 bolts to remove and replace with new one. On some senders you have to fill the tank then let it go below 1/2 tank for the new sender to calibrate and you should be good to go.

[Lieutenant Dan]

@SpartanSki There used to be a "do-it-yourself" post on themalibucrew.com for replacing the fuel sender. I did it in my Sunsetter LXI a number of years back. Much more accurate than from the factory

[Lieutenant Dan]

here it is....

http://www.themalibucrew.com/forums/index.php?/page/articles.html/_/fuel-sender-r3