Baller A_B Posted August 29, 2016 Baller Share Posted August 29, 2016 2014 SN with ZO. Has always required the main power to be turned off and back on to power up. Is there a fix for this? Link to comment Share on other sites More sharing options...
Baller dbutcher Posted August 29, 2016 Baller Share Posted August 29, 2016 I've seen the ZO do that on several 200's. I suppose there is a fix; but if that's all that's wrong, is it worth your trouble? Link to comment Share on other sites More sharing options...
Baller LeonL Posted August 29, 2016 Baller Share Posted August 29, 2016 Just a question....if you finish for the day, turn the boat off, turn off the master power switch, when you come back and power up does it work? Does it require a master power down every time that you turn the engine off and restart to,get ZO going again? Link to comment Share on other sites More sharing options...
Baller skiboat38 Posted August 29, 2016 Baller Share Posted August 29, 2016 Link Screen? Link to comment Share on other sites More sharing options...
Baller A_B Posted August 29, 2016 Author Baller Share Posted August 29, 2016 It is my friend's boat, and skis and drives great btw. @LeonL The process is this: Turn master power switch on. Start boat. Idle out to starting point, no ZO display, can't turn it on, nothing. Shut off boat. Turn master power switch back off and then on. ZO magically starts and runs fine the rest of day, even when boat is stopped in between skiers or when talking to skier. We turn the boat off while skier is getting ready, so it is just an annoyance to turn off master power switch @klindy - what are you disagreeing with? Link to comment Share on other sites More sharing options...
Baller_ MISkier Posted August 29, 2016 Baller_ Share Posted August 29, 2016 The same thing happened on a 2015 200 at our tournament this weekend. It was the integrated screen ZO. Once they got it going, no further issues. The worst slalom equipment I own is between my ears. Link to comment Share on other sites More sharing options...
Baller LeonL Posted August 29, 2016 Baller Share Posted August 29, 2016 So, every time you turn the engine off, the next start up gets you zero ZO? Link to comment Share on other sites More sharing options...
Baller skiboat38 Posted August 29, 2016 Baller Share Posted August 29, 2016 Once you turn the master switch, wait 15-30 seconds before you hit start.....should cure it Link to comment Share on other sites More sharing options...
Baller A_B Posted August 30, 2016 Author Baller Share Posted August 30, 2016 Leon - yes. After the first reset, runs normal. I don't think we wait 15-30 seconds. We can try that. Always seem to be in a hurry to go skiing though! Link to comment Share on other sites More sharing options...
Baller skiboat38 Posted September 13, 2016 Baller Share Posted September 13, 2016 @A_B, did that cure it??? Link to comment Share on other sites More sharing options...
Baller A_B Posted September 13, 2016 Author Baller Share Posted September 13, 2016 A new boat cured it! Link to comment Share on other sites More sharing options...
Baller skiboat38 Posted September 14, 2016 Baller Share Posted September 14, 2016 I understand....if a trailer tire gets low, I sell the boat Link to comment Share on other sites More sharing options...
Baller A_B Posted September 14, 2016 Author Baller Share Posted September 14, 2016 Never got a chance to try it. He bought a promo and the old one is sitting on a trailer now. Link to comment Share on other sites More sharing options...
Baller Drago Posted September 16, 2016 Baller Share Posted September 16, 2016 Remember this when that boat comes up On SIA Link to comment Share on other sites More sharing options...
Baller Hockdog Posted September 16, 2016 Baller Share Posted September 16, 2016 Sure miss Perfect Pass..........Juzz sayin'. Link to comment Share on other sites More sharing options...
Baller ScarletArrow Posted July 15, 2018 Baller Share Posted July 15, 2018 Bump... My 2012 SN 200 has this same issue. I know of other (newer) 200's with the exact same problem. Another symptom is that the small light next to the starter button (there are two - the one on the right) will blink. I will try the 30 second wait next time out. I've heard ideas that the ZO unit does this because it isn't receiving enough voltage... but why on some and not others. Link to comment Share on other sites More sharing options...
.webp.594e76dd75aefabbbd8c63a3242fcd7d.webp)
.webp.a30f66e5f4553a0ea06e4fe12520951c.webp)
.webp.8497384650ada8a3e4f1fd5dd6c3fb2a.webp)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now