2017 Senate Settings

[Wayne]

Looking for fin and binding settings for a 71" Senate Graphite.

 

I was going to use my 2016 Senate settings as a starting point but noticed the spot where you measure DFT is quite a bit flatter which seems to have shortened the potential DFT numbers. Also the fin box screw isn't threaded enough to hit much over 0.735 so I'm kind of scratching my head for the 2017.

[perfski]

Hi Wayne, For 2017 Senates ...here are the numbers Matt and Brooks have confirmed as of about 2 weeks ago 6.980 Long, 2.465 Deep, .760 DFT flat, 9degrees and 31.75" Hope that gives you a starting point.

[brooks]

@wayne everything above is true except change front boot to 32.5. Thanks!

[Wayne]

@brooks you sent me an email with numbers too.

 

Which numbers are "right"? :)

 

[brooks]

@wayne sorry about that, yesterday we realized our math was wrong, go with 32.5 and I'll be making an amended chart soon. Thanks.

[Wayne]

@brooks thanks. So just for my sanity on a 71" use

32.5 front boot

6.980 length

2.465 depth

0.760 DFT

9 degrees

 

By the way, who do I need to thank for that flat spot at the end of the ski for DTF measurements?

[brooks]

@wayne exactly! You can give @Chris Rossi a big high five for that one!