Baller matt_b Posted January 30, 2017 Baller Share Posted January 30, 2017 Trying to decide if I should just mount my new Vapors with the included plates to my ski, or go to the dual lock route. Used dual lock in the past with very few issues except I was unable to make any adjustments to the bindings in reference to their space apart. I went from a 10 to an 11 and with the 11's the boots are touching, unless I want to drill new hole's in the plastic plate. Link to comment Share on other sites More sharing options...
Baller mbabiash Posted January 30, 2017 Baller Share Posted January 30, 2017 Go with the sequence plate and a mikrojust. With this setup you'll have endless boot settings. I have 11 vapors. Link to comment Share on other sites More sharing options...
Baller_ The_MS Posted January 30, 2017 Baller_ Share Posted January 30, 2017 Go with the Mikrojust and mount the plate Link to comment Share on other sites More sharing options...
Baller matt_b Posted January 31, 2017 Author Baller Share Posted January 31, 2017 Thanks guys, I used the dual lock as a secondary release due to a serious knee blowout a few years ago. On the boots touching, a coach recently was thinking that a larger gap between boots may help me. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now