Orthoski Posted April 30, 2021 Share Posted April 30, 2021 First session of year last weekend, boat started and ran great, zero off worked at the previous setting from last use, but touch screen unresponsive. Currently in tournament mode and mechanical buttons on the sides work, allowing speed to be adjusted in tournament increments, but unable to use touch screen for adjustments in mode, speed, pull type... Battery fully charged, turned on and off several times, manipulated wires in back of unit, no change. Any thoughts/suggestions greatly appreciated Link to comment Share on other sites More sharing options...
Baller ScottScott Posted April 30, 2021 Baller Share Posted April 30, 2021 I am reading that it displays, just doesn't respond to touch....? If you haven't already, give the screen a good cleaning. After that....maybe someone has some ideas toward a reset? Link to comment Share on other sites More sharing options...
Baller skibug Posted April 30, 2021 Baller Share Posted April 30, 2021 2018...should still be in warranty. Link to comment Share on other sites More sharing options...
Baller RAWSki Posted April 30, 2021 Baller Share Posted April 30, 2021 We had similar problem with our 18 the screen had to be replaced. The touch area failed on the bottom third of the screen. So you couldnt map or change events Link to comment Share on other sites More sharing options...
Supporting Member wski1831 Posted April 30, 2021 Supporting Member Share Posted April 30, 2021 A friends did that the other day. We turned off battery switch for a minute or two and back on. Been fine since. Link to comment Share on other sites More sharing options...
Baller jpwhit Posted April 30, 2021 Baller Share Posted April 30, 2021 It happens with these screens occasionally. It often starts intermittently and then fails completely later. If you can get it replaced under warranty, that's probably a good thing. Otherwise, if it acts up later you'll be out the 4k these Murphy units cost. Link to comment Share on other sites More sharing options...
Orthoski Posted May 1, 2021 Author Share Posted May 1, 2021 Switched the battery off and on, gave the screen a good cleaning and back in action. Hoping for a durable fix! Many thanks for the feedback Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now