Prostar rear seat install

[lefty]

Wondering if anyone would be able to supply me with some pics of the removable rear seat  hardware mounted in a 2020 Prostar. Bought the boat without seats, took a while to get the seats, will be installing myself this winter. Seems quite straight forward but a pic of the finished product would be helpful. Dealer supplied stainless screws, wondering if a through-bolt and backing plate is necessary. Any experience or advice is welcome!  Thanks

[Horton]

My boat's in storage ( and a 2023 w/ updated back seat ) so I really can't give you what you're asking for but it's very simple. I think it's just four little screws and 2 brackets. I would think the only difficulty would be getting the placement of the brackets exactly right.

[Mastercrafter]

Put the seats in the boat, center the brackets over the seat frames and centered vertically in the slots of the frame. Mark, predrill, screw.  It a 5 minute task and no backing plates needed. 

[Horton]

what @Mastercrafter said.

[Mastercrafter]

Remember that flooring will lift the seats up slightly so allow some room for that. Here’s a general location, though. 

 

[lefty]

Thanks @Mastercrafter, that looks like what I was expecting to receive. The attached pictures are what I did receive. Quite sure they sent the wrong part, this one will not work as far as I can tell unless I’m missing something 

[skimtb]

@lefty Pretty sure those are for the 2021+ boats.  14-20 is what @Mastercrafter posted pics for. 

[Broussard]

@skimtb Is correct, those are the mounting brackets for the 2021-current ProStar rear sears. You need the 2014-2020 rear seat mounting brackets.

[lefty]

Thanks all. Figured as much. I have sent the dealer pics of both brackets in hopes they get me the correct ones