slalom frog

Giddyup.

Based on my experience, I would use a stainless mainline and 2" pvc. I purchased my a stainless mainline from EZ Slalom and make my own PVC sections out of 2" material. I do not leave it up year round but I have used it for 10 seasons now. Happy to answer any questions should you have any. Good luck!

Hi Bruce, just let you a voice message. Give me a call back when you have time. I can help you out with the information you are looking for. Mike

I got some rubber strap material, very similar to that used in bindings. It's about 1.5" wide and 1/8" thick or so. I attached it to the plate using the same screws and plastic pieces that are used to attached the binding rubber to the plate. I can probably get a photo for you tomorrow if that would help.

@m_pags I as well played goalie. Stopped playing about 4 years ago because just the basic stance bothered me. I still skate out.

@Deke Thank you very much for your feedback. Your situation is very similar to mine in the fact that you play hockey and waterski. Those are my primary 2 activities and timing recovery of the surgery would play a role when I schedule. About 10 years ago I had a "preventative" surgery on my left hip to slow down the degradation, as I have the same condition with both hips. I must say that the left hip is doing very well and does not bother me. My right hip though is progressing just as the doctor predicted, that I would have a replacement before I am 50. Unfortunately I waited too long to move forward with the preventative process on my left hip, rendering it to a point where it was not salvageable. Thank you to everyone for their contributions. It is nice to hear that there should still be waterskiing after hip replacement!

I used to use Powershells with Dual-Lock. For a couple of reasons I am not really a fan of that system. First would be that it is more difficult to place the binding back in the "correct" position after a release. Second, I had issues with the binding releasing in situations when it had not business doing so. I can tell you that it made for some spectacular crashes that we still talk about today! I have been on a Reflex system for over 5 years now and I am very satisfied with it. In my experience it releases when it should and it has worked very well for me.

6', 180. Mine is an XL but I could stand to be in a large. Great top, best that I have ever personally owned or used.

I have seen the holes in the plate under the front horseshoe oblong some, causing this issue. I have also had the horseshoe loosen up some.

Hey Ballers, looking for a little advice from the community. Briefly, my situation is like this. 45 years old, avid slalom skier living in the Northeast and doing a little tricking for fun once in a while. Skiing into 38 and just starting to get through it once in a while. Without a doubt I will need to have a hip replacement before I am 50 years old, realistically I am probably ready for it now but just trying to hold it off as long as I can. Does anyone have any experience with skiing slalom after a hip replacement? If so, I would love to learn of your experiences. Thanks in advance.

Never have tried anything but a RTP. I use a basic Wiley's and ski just fine with it.

My goal was to finally run 38, which I did about 10 days ago. I have not had the chance to try it again since but I was completely stoked to achieve something that has been on my radar for this summer and last summer. Granted, I have only run it once, but it's nice to know that I can do it.

Low profile zip ties might offer a better option for fastening, less chance of cutting or scratching. mcmaster.com/#zip-ties/=v9rlka

2006 Malibu Rlxi with 1100 hours +/-.

He is a still shot from a GoPro video shot from my ski.

Floaty door has saved me 4 times so far!

My new Masterline handle has arrived. I have yet to try it out. It does seem like a very nice build.

I'm with @bf`‌, I use a Google Doc where I have been keeping all of my slalom measurements and history.

@ThePantsManCan‌, I ordered it directly from ML, spoke with Randy.

I have a new Masterline "US Gear" styled handle on order and should receive it next week. They are offering one, though I believe that ML is still working out the details on it. They are not doing any advertising of this option yet, that I am aware of.

I recently skied behind a 200 and then a 2014 Prostar in the same day. While the wake on the 200 is not big, I did not like it at all. I found that the water was too "turbulent" on the 200 and quite a bit "harder" in the prop wash. I suspect that it is because of the RMP's that they are turning the 200 at. Granted, I am not the smoothest skier around and I suspect that I could adjust to 200. However, given the option I would always ski behind a Prostar or a TXi before a 200. Obviously, this is only my personal experience, but for this amateur skier that gets into -38, I am not a fan at this point. As previous people mentioned, the best way is to ski behind it.

I spoke with Masterline today. They are testing the handles currently and estimated that they should be 2 - 4 weeks away from selling them.

@rockdog‌, I'm keeping an eye on when they will be available. Based on my last conversation with them, I will likely be calling them in a week or two.

Masterline is supposed to be coming out with a curved end style handle similar to the US Gear style. I have not seen any photos but I have spoken with them a couple of times about it. They should be in testing at this time and according to my last conversation with them, availability could possibly be later May.

Chef, I had 2 yellow releases break on me last season. Neither of them were showing any visible signs of wear. Epic crash on the slalom ski due to it breaking.