jaredH20
-
Posts
143 -
Joined
-
Last visited
Content Type
Forums
Profiles
BallOfSpray Posts
Events
Downloads
Store
Gallery
Quizzes
Posts posted by jaredH20
-
-
travnews, what difference did you find in your skiing when you changed to the r style, been thinking of doing something similar myself
-
Any one had any coaching done by video with any particular coach? Who do you recommend?
-
Sully i agree with you 100%! I have spoken with Chris & Trent and they have been so helpful and take a genuine interest in my questions. Yet i know of some one trying to find about a ski from another company, and the pro they spoke to just said speak to the dealers and were not to interested.
Did they say what Radar has in store for the 2012 line up?
-
same here
-
they are definitely sending out a new ski.
-
@icewebdan yes same problem, had about 7 sets on it only.
@MS seems like they going to, will be able to get more info later. When i asked why they don't use regular inserts they said because they rust?! i mean seriously thats a terrible excuse
-
d3 gloves
-
had to file new holes in my plate for basically every insert. Goode told me to go ahead and put new screws in where need be. I had to do this in 2 places, i'm also very worried that this form of insert will lose its thread, any one know why they just don't put bonded threaded inserts.
-
@icewebdan what do you mean?
-
So i don't have to use anything? what is JB weld.
-
when i put the new screws in, do i just drill a pilot hole and screw in or do i need to use silicone.
-
@icewebdan, did you let goode know this? How were your back inserts
-
Trying to make a temporary plan here.
Have now noticed that not even the front binding inserts are drilled incorrectly!! You can put a front binding on but wont be able to do the normal adjustments as some of the inserts are further forward then normal!On the front binding inserts the 2 back ones have been drilled one hole back from normal.
-
Mine are unsuable, cant even put a back binding on
-
Just got my Goode 9960. I asked for the HO inserts. The front 2 inserts of the back plate have been drilled wrong. They are wider than normal, by about 7mm wide on each insert. Have tried, Strada, Reflex and Animals none of them line up. I am very annoyed after paying so much money and to have something like this happen its unacceptable. Does any one have Dave's number or some one else i can contact there as there office is closed.
-
my new strada's are are a size 8, the old ones were a size 11. I have noticed that the new back binding sits 1 hole forward of stock on the plate and the old ones sit 1 hole back of stock on the plate, is this normal?
-
just got my self a new pair of strada's and am wondering if they are not to small. My toes can touch the end of the liner but i cant stretch the toe up at all. They do stretch a bit don't they? Should i heat mold them?
-
I have noticed that through my edge change into my offside if i keep the weight distribution equal than i come to narrow but if put a bit of weight onto the back through the edge change than the ski gets much wider. Will video this weekend. Running Rossi's Numbers with the front binding 1 forward of stock and the back binding stock. Was thinking try Rinni's numbers first than adjust binding as i do tend to wheelie more than average.
-
trent recommends a 66" my friend is 1.82m (5ft9) so trent reckons because he is short and light the 66" will be fine, im also leaning towards the 67"
-
ok, but i see the vice 66 is recommended up till 175 pounds
-
got a friend who is looking at the vice, he has just started learning the course. weighs 172 pounds. What size would he need? Im thinking a 66, but think it might be to small at the slow speeds.
-
36mph
-
is the video freezing for any one else? Sound is perfect but video keeps pausing
-
My Brother is getting the 9960 should he go mid or traditional. He is not a very aggressive skier but has a great style, he runs into 32 off.
Video Coaching
in Technique & Theory
Posted