Baller motoxr Posted April 18, 2022 Baller Share Posted April 18, 2022 Good day. After many years of wishing we finally picked up a new (to us) 2014 Prostar - 5.7L engine. It's in great shape and only has 250 hours. (Being in Canada, we sometimes can luck out getting a boat with low hours) So, what's my problem.....I should re-word that, as it may invoke too many responses. What is my question. The boat had been winterized at a dealer out in Winnipeg (a long way from me), and was just delivered to me recently. As I was looking at the engine, it was apparent that they left all of the hoses, knock sensors, drainage screws all removed. I was able to find all of the parts in a cupholder. However, I now want to ensure I put everything back together properly. With this in mind, can someone share some pictures of how their hoses are attached to the water pump, etc? the manual does not show good pictures of the starboard side on the engine, nor does anything that I could find on-line. Thanks in advance for any assistance you can provide. Link to comment Share on other sites More sharing options...
Baller ETskier Posted April 18, 2022 Baller Share Posted April 18, 2022 While you're at it, this is a perfect time to replace all the drain screws with peacocks. Unfortunately the knock sensors are the block drain screws, but they're easy to do. Link to comment Share on other sites More sharing options...
Baller ProStah_Skiah Posted April 18, 2022 Baller Share Posted April 18, 2022 Here are a few pics for you...hope this helps! Link to comment Share on other sites More sharing options...
Baller motoxr Posted April 18, 2022 Author Baller Share Posted April 18, 2022 Thank you so much! These are really helpful. I was not certain if the hoses should cross, yet this makes it clear. Link to comment Share on other sites More sharing options...
Baller motoxr Posted April 18, 2022 Author Baller Share Posted April 18, 2022 ProStahSkiah, thank you again for taking the time to provide the photos! Truly appreciated. ETskier, do you have some pics of what you did with yours? Always love to see better ways to do maintenance. Link to comment Share on other sites More sharing options...
Baller Mastercrafter Posted April 18, 2022 Baller Share Posted April 18, 2022 Knock sensors should be at the top of the block just below the head, not used as the block drain on the Ilmor 5.7. I have a complete engine sitting here next to me in my garage if you need any other pictures or info. Link to comment Share on other sites More sharing options...
Baller chrislandy Posted April 19, 2022 Baller Share Posted April 19, 2022 Mine were not in the block drain plugs either Link to comment Share on other sites More sharing options...
Baller jpwhit Posted April 19, 2022 Baller Share Posted April 19, 2022 I think it changed between the MV8 5.7L (red) and the Ilmore 5000MPI (blue) flavor of 5.7L engine. Link to comment Share on other sites More sharing options...
Baller Mastercrafter Posted April 19, 2022 Baller Share Posted April 19, 2022 My 2015 red MV8 also has them bolted to the block separate from the drains. I suppose if they're mounted well, either location should work. Link to comment Share on other sites More sharing options...
Baller motoxr Posted April 19, 2022 Author Baller Share Posted April 19, 2022 Thank you for the offer Mastercrafter. The weather is terrible today (snow!), Yet hope to get back to assembly this weekend. Link to comment Share on other sites More sharing options...
Baller Lars Posted April 19, 2022 Baller Share Posted April 19, 2022 @ETskier have any pictures of that peacock installed or where you got them? this might be something I want to do. Link to comment Share on other sites More sharing options...
Baller LeonL Posted April 21, 2022 Baller Share Posted April 21, 2022 Guys, not trying to be a smart ass, but a peacock is a bird. A petcock is a drain valve. It's possible that you were both victims of auto correct. Link to comment Share on other sites More sharing options...
Baller motoxr Posted April 21, 2022 Author Baller Share Posted April 21, 2022 Prostah Skiah or others. I see in the second photo where the small brass screw goes. However, I also have a 2nd brass screw to also find a home....any idea where that one goes? THEN, on a second topic, the battery is completely dead (of course), the one in the boat now was a Mercury battery with 1000 Cranking Amps. Hoping others can share what series and size of batteries they are running? Open to recommendations. Thank you all again! Link to comment Share on other sites More sharing options...
Baller LeonL Posted April 22, 2022 Baller Share Posted April 22, 2022 Get the largest battery that fits the hole. Interstate is a good brand. Link to comment Share on other sites More sharing options...
Baller motoxr Posted April 22, 2022 Author Baller Share Posted April 22, 2022 Agreed. I just wasn't sure what the biggest size others have been able to wedge in there. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now