DavidN

Pricey, but probably the easiest way to do it... https://www.thedrive.com/tech/30431/electric-v-8-crate-motor-from-electric-gt-is-sema-swap-ready

The house is 12534 Lake Denise Blvd, Clermont, FL 34711 The lake to the right is Lake Denise, where Boris Laval is running the Monte Carlo Training Center. The Swiss Waterski Resort is using the two lakes on top of the map (Lake Caroline and Lake Stephanie). To the left there’s Champion Lake (a community lake) and Lake Pierrot (privately owned and used). Have fun! :)

Don’t forget to stop by Boris (MC Training Center) for a set! I think it’s his lake in the pictures. That lake skies absolutely amazing!

Name sounded familiar to me, then it hit me - saw a NBC Dateline show last year featuring the disappearance of Jennifer Dulos. What a horrendous story!

Can anyone explain what the plus-setting exactly does? I tried a few settings with the + last year and couldn’t really feel an advantage.

It’s pretty hard to add to Horton’s list. Two sites come to my mind nonetheless... The Boarding School, FL Trophy Lakes, SC

@503Kento I redid the bunks of my boat lift a couple weeks ago and used black 18oz bunk carpet I got off eBay. Excellent product! Far superior to the original carpet I removed from the bunks. 202713432128 is the article # on eBay, “boatcarpetsales” was the vendor.

Wasn’t there something similar happening last year or maybe two years ago when a handful of new wakeboats had been stolen out of a dealership lot? I think it was Canada as well. That whole scenario above sounds so familiar... And BTW - OP should maybe get the descriptions right. Super Nautical ... come on man ... :D *edit* - I knew it sounded familiar. https://www.ballofspray.com/forum#/discussion/18495/stolen/p1

Swiss in Clermont. Or Boris‘ Lake (MC Training Center) right next to it.

Or just buy a perfect one for around $25k and go ski. http://www.ski-it-again.com/php/skiitagain.php?endless=summer&topic=Search&category=Boat_3Event&postid=53244

@Horton exactly. Only interesting for someone who crashed his 200 hull. The spray paint should sand off fairly easy and the original gelcoat needs probably only a buff. That is if the idiots didn’t do any damage to it. It’s a sad story nonetheless! Hope the original owner had insurance covering for it!

@Ed_Johnson I really wish I could do that! Will pick up the boat next month and would love to have the lift set up by then. Still no sufficient data. And unfortunately no (more) 200’s on our lake to measure.

I was just about to ask the same question then found this thread. I have a vertical 4500lbs lift with 2 bunks, currently adjusted to fit a Malibu Response. I need to adjust the bunks to fit a Nautique 200. Can anyone provide me with some measurements. Please. Thanks in advance! Here’s the setup:

@buechsr Yes, that was my 2005 Response.

@ToddF - I do that all the time. The John Deere is an awesome Tow Vehicle. :D JK, only to haul around the empty trailer. Boat is sold BTW.

Sale is pending.

Check your door seals, especially in the back of the house like patio doors. These little guys can squeeze through incredibly tight spaces! The foam strips can easily be replaced (HD and Lowes carries them).

Crazy!!!

Woke up to find some very sad news this morning. Another icon gone. :'( Thinking of his family and friends!

The time for an upgrade has finally come, so I have to sell my Malibu. 2010 Malibu Response Closed Bow, Indmar 350 LCR EFI-MPI Engine, 330hp, 680hours Sunbrella Bimini Top, ZeroOff (upgraded to Single Puck, Rev.S by Freddy Krueger), Flip-up Bolster Seat, Isotta Steering Wheel, PTM Edge 140 Mirror, Indmar Sea Strainer with EZ-Flush connection, OJ Water cooled Dripless Shaft Seal, Primex Silent Rider Mufflers, Stainless turn down Exhaust silencer tips, Fiberglass Swim Platform with new SeaDek Pad, Stainless Wedge Bracket & Swim Platform Door, 2 pairs of SS pull-up Cleats, Secondary Bilge Pump, Patriotic Decal Upgrade, CE Package Original Malibu Boat Cover + Custom made Cover, custom Malibu / SMP Single Axle Trailer with torsion axle, surge Brakes, and LED Lighting Boat and Trailer have clean Titles and current Florida registrations. It is a one owner boat in mint condition, meticulously maintained and very well taken care of. Upholstery, carpet, and gelcoat are in excellent condition! Fresh water use only, always kept on covered boat lift or on trailer, stored indoors. Engine oil was changed every 50 hours. (Full service records with receipts since bought new will be provided.) Recently serviced/replaced: Battery, raw water pump, impeller, fuel pressure regulator, fuel filter, spark plugs, distributor cap & rotor, PCV valve, transmission fluid. The boat runs, drives, and skies excellent. It is in showroom condition with only minor signs of usage. It can be test-driven and skied anytime! Located in Clermont, FL I’m asking $26,500

@75Tique - nice and cheap solution, however, did you check on the ID of that Lasco pipe fitting? It reduces the water flow significantly! It’s like your raw water pump has to suck the cooling water through a straw now. I would be a bit concerned of premature impeller failure and / or cooling problems with that setup.

Easiest way would be to replace the factory sea strainer with the indmar version. Has the flush connector built in. Here it is on my engine:

Intuition Aqua liners will fit and work well in Reflex hardshell bindings. https://www.ballofspray.com/forum#/discussion/comment/357424

IDK about the King of Darkness this year. Haven’t heard a thing so far. Drew Ross’ Ski academy is on the adjacent lake. https://www.facebook.com/DrewRossSkiAcademy/