5/32 Hex head bolt specifics

[gt2003]

Can someone please tell me the specifications for the 5/32 hex head bolts for a Radar fin block (size, threads, length)? I've used the search function but I can't find it. I've got a "backup" fin block and one of the bolts is stripped out so wanting to have a replacement in case it's needed. Thank you all

 

[Horton]

@eddie_roberts_jr

[eddie_roberts_jr]

It's a 10-32 x 9/16" socket head cap screw 18 -8 stainless 5/32 Allen head

[gt2003]

Wow, Thanks @eddie_roberts_jr

[gt2003]

Just ordered a box of 100. If anyone needs some, let me know and I'll throw a few in the mail. Thanks folks and especially @eddie_roberts_jr

[jwroblew]

the -32 is the thread pitch

[gt2003]

Thanks @jwroblew . I eventually read the fine print where it stated 10-32 is fine thread but they list it under coarse as well since it is so common. They are on their way!

[gt2003]

@eddie_roberts_jr , just got mine in and they are WAY SHORT. Looks like the measurement is 10/32x7/8, not 9/16

[eddie_roberts_jr]

The measurements I gave you are for our newest fin block, the one that looks like the Mapple.

[gt2003]

Thanks @eddie_roberts_jr , so my 2014 Vapor fin block takes 10-32x7/8" and the new one takes the 9/16"?

[eddie_roberts_jr]

Correct

[gt2003]

Thanks again @eddie_roberts_jr ! You are greatly appreciated on BOS. It's wonderful to have your knowledge available. Thanks for being so accessible to us!

[eddie_roberts_jr]

Sorry I had you buy a bunch of the wrong bolts. I should have asked which clamp you needed them for.

[gt2003]

It's all good. Looks like both mine needed the 3/4 or 7/8 length. I should have measured myself. Thanks again for hanging out around this place!