ColeGiacopuzzi

When trying new skills this is THE number 1 thing. ^ Whatever it takes to put a picture in your head; Practice on land, practice in front of the mirror, take video of yourself to see the movements you want to accomplish. If you can see what you're trying to do then you can start to put that picture in your mind to go out and execute it. This is one of the most underrated, unutilized skill when trying to learn new movements

Stoked to hear you're loving it @alex38 @Chris Rossi would be stoked to see that photo of the hat signed by him!

@Skiphreak You can't go wrong with either honestly, but that being said you're on the senate which would be the ski I would recommend for those speeds the most. @lw_moskier I Agree with @Horton I would measure the Edge boot the same as reflex.

@Horton yes that is correct!👌🏽

@alex38 its only an 1/8 difference, but no that only applies to the difference between reflex and the new style Vapor boot.

@C5Quest you have to use smaller screws near the release so you can move the plate where you need to. I just messaged @aupatkingthe same thing. It maybe be thicker but it doesn’t inhibit the flex of the ski. If it's any validation It’s used by some of our pro team. Also I want to say @Hortonused it as well.

@aupatking Where you at now? I’d go: 30 1/4 2.500 6.845 .760 9

I encourage everyone to go give this episode a listen. It really talks about how to work with the boat and can open some eyes on how to approach your skiing maybe in a different way. Great job by Rini, @TFIN & @Chris Rossi

Ramp is looking really good!!!

Forgive me if I misunderstand, but having one single reference line on a ski doesn't change the fact that your ankle bone sits in a different place when it comes to different boots. That's why this thread was created. That's why the vapor boot is run in a different spot than the reflex.

The lakes are getting dialed in very nicely a lot of work going on!

@C5QuestThat is correct!

If you have been running a reflex and switched to a vapor boot, we found we were running the vapor boot an 1/8 forward from where the reflex was. That was the change I made when I switched. 29 1/2 on a vapor boot equals 29 3/8 on a reflex.

Yeah a bit more free exactly, I usually run my boots back a hair, I just like a bit more tail slide. The only thing I did on those settings was move my fin back from .758 and I liked it better so I stayed at .752

@C5Quest Yeah I have ridden the ski with a lot of different settings, both long/shallow and short/deep it works really good in a lot of places which is really cool. I ended up landing at for 66” 29 3/8 2.500 6.845 .752 9

My all time favorite place to ski. Definitely one of the most beautiful lakes there is. It has a mystique that is hard to put into words. Always an honor to be able to ski there.

@Fjeff All of our fin numbers for DFT are using non slot calipers. What are the numbers you're using right now? Feel free to post some video or you can PM me as well and we'll get you dialed in.

@CGSki like @tjm said i would try it there, that’s pretty close and there’s not much of a gap there already.

@Waternut there really isn’t a wrong answer, just depends on your budget/route you want to go. Vapor is definitely still a great choice. Up until 2017 the lithium basically was our high end ski until we came out with the pro build, so it is extremely capable. The senate would be awesome too. Having the extra width would make it feel more stable if that’s what you’re craving. It’s a toned down version compared to what you’re used to but still a very capable ski. Might be worth trying to see if you can demo one to see if you want to go that route. Hope this helps.

@MI3EventerI know this isn't exactly what you were asking for, but figured I'd post it here since its a great video on how to learn to change your fin. He breaks it down really well. How to set up a fin with Chris Rossi

@MattPI know there will be practice at the end of each day at Ski west. As far as other lakes doing practice/demos it is early on, but some lakes might do it! Hopefully we can make something work at my lake for demos. Let’s call it in the works we’ll see. Nothing set in stone.

Stoked to have you a lot of you guys out here for 2 years! @rico and @charlieskiwest are already working there tails off to get the already great site better.

That is a 2021 Vapor pro. For 65” I would start at either stock deep/short or I ran these numbers and had a lot of success. 28 15/16 6.840 2.505 .745 9

@lefty That error can also be from the check valve at the back of the motor, an air bubble gets caught and water can't flow and the motor starts to creep up in temperature, but usually under power the bubble gets cleared and you can watch the temp fall instantly. It was a known issue on the 6.0L 2020 Prostars. The plastic check valve from the factory weren't very good and you can buy an aftermarket brass one. Might be worth checking at least and making sure the clamps are tight. Hope this helps.

Her gate is really really good, the only thing I would change is the shoulders facing down course. As a righty The shoulders should be open to the boat since that's where they'll be anyway; its more natural and makes it easier to make that first move. With your shoulder closed off it takes longer to initiate the turn in. The more important thing is where your right hip is, it should be driving up and facing down course which she does really well.