Lars

@oldjeep yes sir for at least the last 10 years.

@robmollysilverlake Minnewashta

Due to a crappy spring I was delayed in getting our permitted course out this year, but I did most of it by myself and finally got it raised on memorial day. (insta-slalom course with stainless mainline, Jim's old course) Then we had a no wake restriction for 10 days earlier this month, so I was pumped when that was lifted last week, but then a neighbor texted me that the course didn't look right.... Took that with my gopro. All 6 of the turn buoy gate arms were buckled or snapped in half! Here are the 4 that I removed: We figure someone must have been dragging an anchor through the middle of the course and then jolted the mainline which snapped the 6 gates. the entry and pre gates were unaffected. Don't know how they didn't also break the main line, or how someone could boat around so carelessly. Fortunately the same neighbor had an extra course and we worked on replacing the gates and he re-tensioned it. Happy to say I've gotten two great sets in this week Our lake association added a blog post to the website about exercising care around the course, but it never ceases to amaze me the damage inflicted on our course. Fortunately I think I can repair the broken gates with parts from home depot to keep as a backup in case it happens again... :(

@wish don't look at the weekend forecast... . Unfortunately still working on getting my course in. Hopefully in the next few days I'll have it all in!

thread jack.. Unfamiliar with this fan, anyone have a picture?

@MS even private party auto sales in MN have sales tax added when you go to transfer the title. A little bogus since the PO already paid sales tax when they bought it. Guessing its the same in SC.

@epnault yeah he's just waiting for the ice to thaw to take it for a spin!

@epnault talk to SkiWest over on TT before you buy the cable, he's looking into the same thing.

@Ski_Dad is correct. The issue is that the newer displays aren't the same voltage as the older master modules, requiring you to replace both. I had the same issue as @Goldcup101 and lived with it for a while, but eventually upgraded to stargazer and bought a new display at the same time.

Back to the OP's original question, anybody ever skied an Outback? Can't say that I know anyone that has...

In the evenings by the time the surfers call it a day it's too dark for the driver to see the buoys and always figured I could get a decent set in if the buoys were lit.

Agree with @lpskier on the submersible course, that might keep the appeal open to more people.

@Rowdy it's actually a 95, here's the listing from team talk: https://www.mastercraft.com/teamtalk/showthread.php?t=99147 his email is wntanaka@gmail.com

Where are you located? my ski partner is selling his '94 PS205 with stargazer in MN if that might fit the bill.

@6balls I think any boat we'd use it with is stargazer or better so wouldn't need the magnets, but could gather them and give them back to you.

Also sorry to hear about the life changes... I would be interested in at least one course of parts. Are the ends marked or does it need to be dragged up?

You forgot to mention your waterski lamp!

@oldjeep I've got 220V at the end of my dock! Shared neutral GFCI to two outlets so I can power the weed blower and the boat lift without the voltage drooping significantly. PO put a 220V sub panel on the beach so I figured I might as well utilize it.

Skidim for me as well. Get on their email mailing list, they usually have a couple of 10-15% off promo codes they'll email during the off season.

Afraid I might have to agree with @oldjeep... I found your local CL ad, when I searched for 2004 f150 supercrew lariat the next most expensive one is in the 6000s.

agreed with @BoneHead used to work for Innovent and we put some HVAC units on the new addition and they did, in fact, have heat. Camp Snoopy (what's nickelodeon universe?) is mostly glass ceiling so that acts like a big greenhouse and definitely doesn't need heat. to the OP, I too have daydreamed about an all season lake. Is 150 feet wide enough? if so, could buy 8 of these buildings and be well on your way to an indoor lake: https://mbmisteelbuildings.com/metal-buildings-for-sale/150x250

Lots of complicated suggestions! I like the LED light idea too, Nice and simple. Would be nice to know when it's coming though, maybe a few 'pre staging' blinks to help. Sure it'll take a few passes to figure outt the timing but once you know when you should make your cut, should be a non issue.

I thought I heard they are big bucks if they aren't ordered with the boat?

I am nowhere near where I was when I let go of the rope.

@tjones999 also has the parts up on thingiverse if you know anyone with a 3d printer. I used the printer at work to make mine. https://www.thingiverse.com/thing:2018229