Jump to content

alex38

Baller
  • Posts

    564
  • Joined

  • Last visited

Everything posted by alex38

  1. @Dacon62 You may need to change your rpm setting to inverted, and with v9 you have to map the course. Mine was all over the place the first time I drove it then I remembered about changing rpms to inverted-this solves the problem.
  2. Put it this way: was looking at a boat with ZO for 25k, now I’m not, I saved 24,850 dollars.
  3. @keithh2oskier No Zbox, upgraded to v9.12 with download stick. Upgrade simplifies (which is important) by eliminating magnets and in course calibration with autocal and course mapping Seems the software has just been improved to have boat settle in with no yo yoing around rpms which means to me it felt softer at the gate, waaaay more consistent pass to pass. Was so great to set it up out of the box, FOLLOW the instructions step by step and have the very first pass be lights out better than the boat has ever run Just get it. I could get v7.0.62 dialed ...until a new driver would come along then it was back to square one. Driver was just as pleasantly surprised told me he was purposely overthrottling to see what it would do-I couldn’t tell Went 22, 22, 28, 28, 32 easy right out of the box and I’m tired and not skiing my best yet Just order it
  4. Just upgraded mine today from v7.0.62 to v9.12. 2002 nautique cb 5.0 275 hp (rare smaller engine) Skiis like a different boat now. Set it up out of the box and tried it-first pass felt light years better driver noted huge difference too. Completely better feel all the way around those with any issues I know PP will support, I think this is a solidly improved product. Better than I thought it would be.
  5. I made my own out of a noodle cuz I couldn’t find any that were rope friendly, also customize the size to about 3.5 feet. We always acknowledge it when it does it’s job
  6. alex38

    66in RS-1

    Let me check with my friend- how much?
  7. I thought September was good... this has been ROCKtober 17! couple solid 32’s qualify me for awesome late skiing
  8. Just tried mine while in a dry suit air 45 water 65 fog city. 3 22's and 2 28's. It works, ski feels lighter and more lively? Just a test run at easier passes but felt wider maybe. Nice to know I can move in 1/16 increments to fine tune smear. I've always felt like 1/4 or 1/8 inch could be the difference between a wheelie and a tip bite (which I could be wrong about). Really cool product very glad I tried it. This is coming off an aluminum sequence of 7 years.
  9. @UWSkier did your ski partner have an aluminum sequence previously?
  10. Anyone try the new plate yet? Do we still use the spacer washers under the plate?
  11. alex38

    66in RS-1

    It's for a friend, checking...
  12. If my g10 plate works out well I too will have a sequence
  13. @skijay do you feel there will be any differences in flex in regards to what you have diagnosed with different mounting styles (floater washers vs not)? I have used floaters front and back for years. Thank you for weighing in.
  14. Has anyone tried this yet? And has anyone gone from the aluminum plate to the g10? I have had an aluminum sequence for about 7 years (the same one) and my g10 comes tomorrow, just wondering if anyone can throw up any expectations or big differences.
  15. Hey all, Just a shot in the dark if anyone out there has any medium to lightly used Radar RS-1 skiis. Lookin for a 66! Thank you.
  16. crazy thing for me was before I put the washer in I measured the other side and it read shallower! I had to reset so I had desired depth on offside before I could even begin the experiment. then added washer to onside. Then I reset the length and dft. I measured length from the other side and that too read differently. My ski must be twisted? I'm no finball wizard but definitely ran the best -32 in a while. Very fast turns had to adjust timing.
  17. Pretty cool adjustment, definitely felt a better onside while maintaining my sort of lights out offside. Thanks for all those who posted.
  18. Great, I'll post results in a couple hours.
  19. Will it work if offside is 2.502 and onside is 2.478?
  20. Not knowing "what's going on out there" so to speak. Anything can complicate it for me.
  21. You can't tell cuz I took it too close but this is the reflection of the sun off my ski onto the carpet was totally weird when I first saw it and I never catch good photos so I'm putting it out
  22. Is that cuz of all the talk about slalom skiers using trick mode? Tricker in Slalom mode
  23. 10th person to run 41 in a tournament
  24. Got it thank you, so basically a regular premium ski that is sold new is a first. I get paranoid when I hear slalom terminology I don't know about... even though the lake is already frozen.
×
×
  • Create New...